Zhuji Haidao Machinery — HAIDAO garden tools
The HAIDAO H36 CS40-401C is a 36 V cordless chainsaw for orchard pruning, tree maintenance and cutting small logs. HAIDAO lists a 400 mm (16 inch) guide, a 380 mm cutting length, a 3/8 inch chain running at 0–25.5 m/s and a 150 mL oil tank. It weighs 4.5 kg with one 4 Ah pack and comes with one H36B4 battery and one H36C charger. HAIDAO states…
Zhuji Haidao Machinery — HAIDAO garden tools
HAIDAO sells two compact 18 V hedge trimmers in its H18 range: the SCHT-A-402FC2 with a curved blade and the SCHT-402FC2 with a flat blade. Both pages list the same 410 mm blade, 390 mm cutting length, 35 mm tooth spacing, 25 mm cutting diameter and 1500 cutting strokes a minute, and both weigh 2.2 kg with a 4 Ah battery. The blade shape is the…
Zhuji Haidao Machinery — HAIDAO garden tools
The HAIDAO H36 BBL-0 is a 36 V cordless blower sold as a bare tool, with no battery in the model heading. HAIDAO lists air volume of 2.9–17.2 m³/min, a maximum air velocity of 86 m/s, an average velocity of 11.7–71.9 m/s and a blowing force of 0.7–24 N, with two speed settings at 13000 and 16000 rpm. It weighs 2.9 kg without a pack. Use it for…
Zhuji Haidao Machinery — HAIDAO garden tools
The HAIDAO H36 CBC-401C is a 36 V cordless brushcutter for grass, weeds and light scrub. HAIDAO lists three cutting options: a 330 mm line head, a 305 mm straight blade and a 255 mm 40-tooth blade. You fit one at a time, so pick the head that suits your vegetation. The motor is rated at 9000 rpm, the tool weighs 5.5 kg with one 4 Ah pack, and the…
Zhuji Haidao Machinery — HAIDAO garden tools
The HAIDAO H18 RHHT-402FC2 is an 18 V pole hedge trimmer with a 410 mm blade on a telescopic pole, for tall or deep hedges you cannot reach with a hand trimmer. HAIDAO lists 30 mm tooth spacing, a 25 mm cutting diameter and 1500 strokes per minute. The pole carries a 960 mm telescopic-length label next to a 2000 mm overall length, and the tool…
Zhuji Haidao Machinery — HAIDAO garden tools
The HAIDAO H18 RHBS-402FC2 is an 18 V cordless pole saw for pruning branches from the ground. HAIDAO lists a 200 mm (8 inch) guide, a 150 mm cutting length, a 3/8 inch chain running at 8 m/s, a 100 mL oil tank and an overall length of 1765 mm. It weighs 2.8 kg with one 4 Ah battery, and the kit heading offers two H18B4 packs and two H18FC…
Wuyi Speedy Garden Machinery Co., Ltd.
The Speedy SPY-10 is a manual-start branch chipper for orchard and farm pruning. Its table lists a Jiangdong 270 cc/11 hp engine, two moving blades and one fixed blade, a maximum cutting size of 5.25×3.75 inches and a gross mass of 77 kg. Two entries need Speedy's answer before you order. The product photograph shows a 457 CC engine label, and…
Wuyi Speedy Garden Machinery Co., Ltd.
The Speedy SPY-550 is a tracked remote-controlled mower with a 55 cm cutting width, a Loncin 224 cc/7.5 hp engine and twin-motor drive. It weighs 136 kg net and measures 900×930×560 mm. It is built for mowing orchard rows, banks and farm vegetation without an operator on board. Speedy's general copy for its remote machines mentions 2.4G radio…
Wuyi Speedy Garden Machinery Co., Ltd.
The Speedy SPY-SG15 is a small wheeled stump grinder with six cutter heads on a 254×75 mm cutting wheel, driven by a Loncin 252 cc/15 hp engine. Speedy lists a cutting reach of 300 mm below ground and 500 mm above ground, a net mass of 92 kg and a 950×800×610 mm packing case. It suits orchard renewal and land upkeep where stumps need grinding out…
Zhejiang Hausys Garden Tools Co., Ltd.
Hausys sells trimmer line in many cross-sections, colours and pack types. For its 15 m donut blister it publishes six diameters, 1.30 to 3.00 mm, each with an inch value and a part number for every profile group. A separate graphic ranks profiles by cutting and sound percentages. To order, pick a profile, diameter and part number from the table…
Zhejiang Hausys Garden Tools Co., Ltd.
The Hausys DL-1201 is a double-line trimmer head that lets out nylon line when you tap the head on the ground. Its parts drawing lists the replacement components and seven left-hand adaptors, so you choose the adaptor that matches your brushcutter's spindle. Two adaptors share the M8×1.25 thread but differ as female and male. This page sets out…
Wuyi Zhongwei Machinery / JOYWAY
The JW-GD520 is a petrol earth drill from JOYWAY with a 1E44F-5 engine of 49 cc, a 1650 W power rating, a 1200 ml fuel tank and recoil start. The photo shows the powerhead in a surrounding handle frame above an auger. The table calls the engine single-cylinder four-stroke yet also prints an oil ratio of 25:1, the mix used for two-stroke fuel.…
This category covers the handheld, walk-behind and remote-controlled machines that keep lawns, orchards, estates and small woodlots in working order, together with the gear that moves timber out. Buyers usually choose by job: cutting grass, clearing leaves and thatch, cutting wood and vegetation, chipping prunings and grinding stumps, hauling logs, and orchard tasks such as digging holes, driving posts and frost protection. The second choice is the power source. Petrol, mains, battery platforms from 20V to 62V and hybrid engine-plus-motor drives all appear here, and each one changes what the quotation has to include.
For lawns, the smallest machine is the DAYEE DY13-900-00, a 900 W corded mower cutting 320 mm, with Turbo's TBE corded models running from 320 to 440 mm. Petrol walk-behind choices include the Dobest DB8721S with a 21-inch cut, a 170 cc engine and side-discharge, mulching and bag modes, the Joyer JT1620HP three-wheel family at 42 cm, and Sinharbour's HG48 at 48 cm; TPT's TPLM38DC20 runs on two 20V batteries instead. Orchard rows, banks and rough grass call for remote crawler mowers: the Changxu 4GY-550QA (550 mm, 147 kg, a listed 0–30 degree slope), the Speedy SPY-550 (55 cm, 136 kg), DAYEE's twin-cylinder DY330-764SB-00 with an 838 mm cut, and the diesel DAYEE DY400-815SB-00 with a 1000 mm swing-blade cutter at 525 kg net. On these machines the slope limit, remote distance and how the controller stops the machine matter as much as cutting width.
Leaf and turf work splits by power and size. The DAYEE CXD1600 is a 230 V hand-push collector with a 45 L bag; the DY580-1600S-00 runs on two 8 Ah packs and drives itself at 3.6 km/h; the petrol DY780-212S-00 has a 212 cc engine, a 78 cm width and a 240 L bag, and takes scarifier, brush and hose kits. The Turbo gasoline scarifier takes spring-wire and steel-blade cylinders for thatch, and the HAIDAO H36 BBL-0 blower clears paths and orchard lanes at up to 86 m/s.
For cutting, petrol chainsaws run from the Remo RM-CS3800H (38 cc, 1.3 kW, 11.5 to 14 inch bars) to the Boer BEZZ-581 (54 cc, 2.5 kW, 18- or 20-inch bars). Cordless saws include the HAIDAO H36 CS40-401C with a 400 mm guide and JOYWAY's JW-ECS6016 with a 16-inch bar. Brush cutters range from the PASSION PS-BC260A at 25.4 cc to the BONA BN500C at 52 cc and 1.75 kW, with Remo's nine RM-BC models between them. Pruning at height suits HAIDAO's RHBS-402FC2 pole saw, and close orchard and vine work suits the SUCA SC-8602Y shears, rated for hard branches up to 21 mm and soft ones up to 30 mm. For replacement heads, the Hausys DL-1201 head fits a spindle through one of seven left-hand adaptors, with line sold by profile and diameter.
Prunings go to a chipper sized to the branch. The Superpower CPY0130 is a 230 V, 2.5 kW electric shredder for garden waste; Speedy's SPY-10 and the Changxu CXC-701-1E are petrol orchard chippers, the latter listing 3 to 100 mm branches and 800–1000 kg/hour. The Speedy SPY-SG15 grinds stumps to 300 mm below ground. To move timber, the Scandi 4W-A01A log trailer carries a listed 1000 kg, the Grapple Crane 450 adds a 4.4 m arm that lifts 200 kg at full reach, and Scandi's 4W-A07 is a hand-crank winch frame. On steep slopes the Lihao MF-200M monorail carries a 200 kg load on rack-and-pinion rail, with uphill and downhill angles set by the engine mounting.
Orchard set-up has its own tools: JOYWAY petrol earth drills with augers from 100 to 300 mm, the Sharp PD82XPM post driver for posts up to 80 mm at up to 1,850 blows per minute, SUCA's SC-9601 and SC-9701 branch-tying tools, Remo's 12 L battery sprayer, and the Sanxin SX-FSD15-360 frost fan, a 3.7 kW, 380 V unit with a stated 7.5 mu protected area. Whatever the job, describe the material and site first: branch size and species, stump size, grass height and slope, post profile and soil, or log length and route. Then fix the power package (engine code or battery voltage, number of packs and chargers) and the cutting or working kit, and have any figure the maker prints in two versions settled as one value in the quotation.
Prepare a category-specific sourcing brief · Read procurement guides
| Selection field | What to establish |
|---|---|
| Job and material | Branch diameter and species, stump size, grass height, leaf load, post profile or log length the machine has to handle. |
| Site and terrain | Slope, row width, cable or fuel access and the route for remote mowers, trailers and monorails. |
| Power package | Engine code and displacement, or battery voltage with the number of packs and chargers in the kit. |
| Working kit | Bar and chain, blade or line head with guard, augers, sleeves, cassettes or bags supplied with the unit. |
| Listed figures | One agreed value for any figure printed twice, such as branch limit, cutting width or engine size. |
| Spares and service | Wear-part codes, operator manuals and the repair terms that apply in your market. |
Line up quotations for machines that do the same job at the same size, and price each one as a complete working kit: engine or battery packs and charger, plus the bar and chain, blade or line head, adaptors, sleeves or augers that ship in the box. Where a page prints two values, such as the CPY0130 branch limit or the CXC-701-1E capacity, ask each supplier to name the one it quotes against. Compare remote mowers on slope limit, remote range and run time under load, and trailers and cranes on the load chart at your reach and the hitch. Then weigh spare parts, manuals and service terms for your market alongside unit price.
Send these questions with your enquiry and ask for the model-specific documents in the quotation.