Garden & forestry
PASSION PS-BC260A Petrol Brush Cutter
The PASSION PS-BC260A is a petrol brush cutter with a 1E34F two-stroke engine of 25.4 cc; the catalogue title rounds this to 26CC. The model photo shows a curved shaft, a loop handle, a cutting head and a guard. PASSION lists maximum output of 0.75 kW / 1.0 HP and 11000 rpm at no load, a diaphragm carburettor, a 25:1 fuel mix and a 0.55 L tank. Pick the cutting head for your grass or weeds first, then ask for the approved attachments, the cut width and a demonstration on your kind of vegetation.
Wuyi Passion Industry and Trading Co., Ltd. ↗
Build my procurement briefStart with the cutting assembly
The PS-BC260A photo shows a curved shaft and a loop handle. The blue straight-shaft machines elsewhere on the catalogue page are other models. Ask which heads and blades are approved before planning heavier work. If you are pricing a second two-stroke model at the same time, the Jingjiu BC328 brush cutter is a fair one to quote alongside it.
| Part shown | What to ask PASSION |
|---|---|
| Cutting head | The head's part number, what it may cut, and the line or blade size. The table gives no line diameter, blade diameter or cutting width. |
| Guard and fixings | The guard, attachment interface and fixings that go with your chosen head. Use only combinations PASSION approves. |
| Loop handle and harness | Handle adjustment, grip and control instructions, and whether a harness is supplied and how it adjusts. |
| Shaft | Part and drive numbers before ordering spares, plus gear ratio and coupling size. |
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Model and brand | PS-BC260A; PASSION [1] | Shown on the product page. 26CC in the page title is a rounded size, not a second model. |
| Engine and displacement | 1E34F, two-stroke; 25.4 cc [1] | The exact table figure. Ask for the engine maker and emissions status for your market. |
| Maximum output | 0.75 kW / 1.0 HP [1] | Peak engine output, without a speed or test condition. Power at the cutting head will be lower. |
| Maximum no-load speed | 11000 rpm [1] | The table does not say where this is measured or give the drive ratio. Ask for the loaded head speed. |
| Carburettor | Diaphragm [1] | Construction type. Ask for the part number and adjustment procedure. |
| Fuel mix | 25:1 [1] | Petrol-to-oil ratio listed for this model. Follow the fuel, oil and starting instructions supplied with your engine. |
| Tank volume | 0.55 L [1] | Nominal capacity. Fuel consumption and run time are not given. |
| Configuration shown | Curved shaft, loop handle, cutting head and guard [2] | From the model photo. Ask which other heads, harness and accessories are approved and included. |
| Starting and comfort | Easy-start, anti-vibration and noise-reduction descriptions [1] [3] | PASSION's own description. Ask for measured vibration and noise values. |
Describe the job in your enquiry
Engine size alone tells PASSION little about the finish you need. Describe the cutting job so the head and instructions can be matched to it. Brush cutters and other cutting machines from different makers are grouped under garden and forestry.
The vegetation
Say whether it is kept grass, mixed weeds or other growth, with its condition and size. Ask PASSION what it is rated to cut, including any woody stems.
Access and edges
Describe tight spots, fences, plants, rough ground and the reach you need. Ask for overall size, working clearance and working weight.
The finish
Say what result you want and how you will check it on a trial patch. Ask for cutting height and area per hour if PASSION has them.
A matching set-up
Ask PASSION to name the head and guard and demonstrate that set-up to its instructions, on a PS-BC260A.
Maximum power and no-load speed
0.75 kW / 1.0 HP is the maximum output, and 11000 rpm is the maximum speed with no load. The page does not say the two occur together, where the speed is measured or what the head drive ratio is, so head torque cannot be worked out from them.
Ask for the engine rating and the allowed head speed for your build. How well it cuts also depends on the head and the vegetation. When you accept the machine, record the head fitted and the result on an agreed job. Running the BONA BN500C petrol brush cutter through that same job gives you a like-for-like comparison.
Sources [1]
Starting, vibration and handling
PASSION describes an easy-start system with reduced vibration and noise. The page gives no starting force, vibration value, noise level or test method. Ask for these figures if operators will use the tool for long shifts.
The engine close-up shows the starter handle, fuel parts and a cover. Ask for the operating instructions and a demonstration of starting, control and stopping with the cutting head fitted. Check the loop handle with your harness, and get working weight, balance, handle positions and anti-vibration parts for this build.
Fuel and service for the 1E34F engine
The table lists a two-stroke 1E34F with a diaphragm carburettor, a 25:1 fuel mix and a 0.55 L tank. Ask for the manual, fuel grade, oil specification and fuel use with your order. Our import guide to handheld petrol and battery garden tools covers displacement, fuel mix, blades and the EU, UK and US documents to request for a brush cutter like this.
| Catalogue entry | What to request |
|---|---|
| 25:1 fuel mix | Fuel, oil, mixing, storage and filling instructions for the engine you receive. PASSION's pump uses a four-cycle engine and needs its own instructions. |
| 0.55 L tank | Fuel use under working conditions, so you can estimate run time. |
| Diaphragm carburettor | Part and service numbers, settings and what the user may adjust. |
| Cutting and drive parts | Part numbers for head, line or blade, guard, fixings, shaft and controls on the approved PS-BC260A set-up. |
Comparing PS-BC260A offers
Price, stock, lead time and warranty come from a written quote. The Inquire and Add to Basket buttons on the PASSION page only start the conversation.
Identify the machine
Record PS-BC260A, engine, curved shaft and handle, and the agreed head and guard. Use the full model, not 26CC, when comparing substitutes.
List what is included
Get the packing list, operating instructions, harness and any tools or consumables.
Agree a demonstration
Record the vegetation and ground, the head used, starting and control checks and the cutting result you expect. Put any vibration or noise limit in numbers.
Set delivery and service
Confirm working and packed size and weight, documents for your market, spare part numbers, delivery date and written support terms.
Buyer questions
Is it 26 cc or 25.4 cc?
The title says 26CC; the specification table gives 25.4 cc for the PS-BC260A. [1]
Is 11000 rpm the cutting-head speed?
It is the maximum no-load speed, with no measuring point or drive ratio given. Ask PASSION for the head speed. [1]
Does it come with a metal blade?
The photo shows one head and guard, and no accessory list is published. Ask PASSION which head and guard combinations are approved and included. [1] [2]
How long does a 0.55 L tank last?
PASSION gives no fuel consumption, so run time depends on your work. Ask for a consumption figure. [1]
How low are vibration and noise?
PASSION describes reduced vibration and noise without figures. Ask for measured values before you rely on them. [1]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Official PS-BC260A specification and description
manufacturer · Checked 2026-10-11
Model, brand and engine table: 25.4 cc, power, no-load speed, carburettor, fuel mix and tank, with PASSION's feature claims.
- Original PS-BC260A complete-tool image
manufacturer · Checked 2026-10-11
The complete tool with curved shaft, loop handle, head and guard.
- Original PS-BC260A engine close-up
manufacturer · Checked 2026-10-11
Close-up of the engine, starter handle and fuel parts.
Report a correction through our contact form, quoting PS-BC260A and the relevant specification.