Garden & forestry
BONA BN500C Petrol Brush Cutter
The BONA BN500C is a petrol brush cutter powered by a 1E44F-5 two-stroke, air-cooled single-cylinder engine. BONA lists 52 cc displacement, 1.75 kW rated output and a 1,200 ml fuel tank. The published sheet covers the engine only, so the blade or nylon head, guard, shaft, harness and full weight need to come from BONA with your quote. Start your enquiry with the vegetation you cut, and ask BONA to match the approved cutting kit to it.
Jinhua Bona Power & Technology Co., Ltd. ↗
Build my procurement briefChoosing the blade or head and guard
BONA's BN500C sheet ends with engine and tank data. It names no blade or nylon head, mounting interface, guard, cutting swath or attachment list.
Tell BONA whether you will trim lawn edges, clear soft weeds or cut heavier growth. Ask it to name the approved head or blade for that work and the guard that goes with it on the build you are quoted. Use only the combinations in BONA's complete machine instructions.
Sources [1]
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Model | BN500C [1] | Ask for the build revision and the full list of parts supplied. |
| Engine type | Two-stroke, air-cooled, single cylinder [1] | Ask for the engine manual with fuel mix and lubrication instructions. |
| Engine code | 1E44F-5 [1] | Useful for engine spares. Attachments still need to match the BN500C build. |
| Displacement | 52 cc [1] | Engine size. Cutting width and the thickest stems it handles depend on the cutting kit. |
| Rated output | 1.75 kW [1] | Ask at what speed and by which method this was rated. |
| Fuel tank | 1,200 ml [1] | Runtime depends on load; BONA gives no fuel consumption figure. |
What 52 cc, 1.75 kW and 1,200 ml tell you
52 cc is the engine's displacement. 1.75 kW is labelled rated output, with no rpm or rating method beside it. The 1,200 ml tank sets how much fuel you carry, while runtime depends on the work. Stem diameter limits, cutting rate and power at the shaft are not published.
To compare the BN500C with other cutters, ask BONA for the engine and build, the rating basis, the permitted attachment speed and the conditions it was rated under. Then run a demonstration with your vegetation and the agreed attachment, and record the full work cycle.
Sources [1]
Shaft, controls and harness
These parts decide how the cutter fits the operator and which spares you will stock. Ask BONA for each of them.
| Assembly | What to request |
|---|---|
| Shaft and gearbox | Tube and shaft dimensions, connection type, output interface and maintenance schedule. |
| Handle and controls | Handle style, control layout, start and stop arrangement and the operator instructions. |
| Harness and weight | Whether a harness is included, the ready-to-use weight and adjustment guidance. |
| Head, guard and consumables | Compatible parts, the blade or head kit and a wear-part and service list. |
Sources [1]
Certificates and service for your market
BONA's Corporate Honor page shows a heading and placeholder images, with no certificate you can read. Its service page states customer-service principles without a warranty period, exclusions or a repair route for your country.
Ask BONA for the machine certificates your market requires for this build, noise and vibration values, the instructions, a spare parts list and written service terms. Have these in hand before you place a volume order. Our import guide to handheld petrol and battery garden tools sets out the displacement, fuel-mix and EU, UK and US paperwork worth matching against BONA's reply.
Writing a sample request
A sample request turns the short engine sheet into a full, agreed tool specification. Other petrol cutters from Chinese factories are gathered on our garden and forestry page for comparison. Two close matches to quote alongside the BN500C are the Jingjiu BC328 Two-stroke Brush Cutter and the PASSION PS-BC260A Petrol Brush Cutter.
Define the work
Vegetation type, terrain, work pattern and access limits.
Name the tool
BN500C revision, engine, shaft and controls, harness and the approved cutting and guard kit.
Agree the test
A demonstration under BONA's instructions on a defined task, with the full cycle recorded.
Hand over
Machine documents, consumables and spare parts, maintenance plan and warranty contact.
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Buyer questions
How long does a tank of fuel last?
BONA lists a 1,200 ml tank and no consumption figure. Ask BONA for consumption under load, or time a full tank during your trial. [1]
Which blade and harness come with it?
The BN500C sheet does not name them. Ask BONA for the current parts list and the approved head, blade and guard combinations. [1]
Does BONA offer a warranty on the BN500C?
The service page gives no warranty period. Ask BONA to state the period, exclusions and repair route in writing. [2]
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- BONA official BN500C specification entry
manufacturer · Checked 2026-10-11
BN500C engine type, engine code, displacement, rated output and tank size.
- BONA official service and honor pages
manufacturer · Checked 2026-10-11
BONA's customer-service principles and its honor page.
Report a correction through our contact form, quoting BN500C and the relevant specification.