Garden & forestry
DAYEE DY13-900-00 Electric Lawn Mower
The DAYEE DY13-900-00 is a small corded electric lawn mower for 230 V / 50 Hz mains. A 900 W aluminium-wire induction motor drives the blade under a PP deck, cutting a 320 mm (13 inch) strip. You push it by hand and choose one of three cutting heights, 25, 40 or 60 mm, by wheel position. Clippings go into a 27 L rear catcher, and the mower weighs 10.5 kg net. It fits small lawns within reach of a power point. This page sets out the table, the supply and cord questions, the height settings, weight and packing, and the details DAYEE needs to quote.
Ningbo Daye Power Machinery Co., Ltd. ↗
Build my procurement briefMatching the 230 V supply and plug
DAYEE lists this mower for 230 V / 50 Hz, and the photograph shows a power lead under the handle switch. The plug type, cable length, protection class and IP rating are not printed.
Tell DAYEE your country and supply, then ask for the rating label, plug and lead specification and the operating manual for the version you will receive. Ask too what extension lead and site protection DAYEE requires. The 900 W figure has no stated basis, so ask DAYEE for current draw if you need it for circuit planning. If the CXD1600 mains-powered leaf collector goes on the same order, check its plug and lead details at the same time.
Planning the lawn and cable route
A 320 mm cut and push drive make a compact mower. How far it reaches depends on the lead supplied and the extension arrangement DAYEE approves. The Turbo TBE Corded Mowers are a second corded design whose lead and extension terms you can set against DAYEE's. Where no cable route is practical, DAYEE's DY162-131PB-06 hand-push petrol lawn mower does the same job with an engine.
Describe the lawn
Give grass condition, layout and obstacles. DAYEE gives no grass-length limit or area per day.
Show the power point
Mark where the socket is relative to the lawn and ask for the approved reach and connection. Ask about use on damp grass too.
Check gates and turns
Request the overall width and the space taken by handle and catcher. Wheel sizes and cut width do not give these.
Agree controls and stopping
Ask for the documented switch functions, cord management and stopping and service procedure for this model.
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Model and drive | DY13-900-00; Hand Push [1] | Pushed by the operator. No self-propelled function is listed. |
| Supply | 230 V / 50 Hz [1] [2] | The electrical version DAYEE lists. Plug type, lead length and protection class are not given. |
| Motor | Aluminium-wire induction motor [1] | DAYEE lists this under Engine Type. Efficiency and duty class are not printed. |
| Power | 900 W, under Engine Power [1] | DAYEE leaves the input or output basis of this figure open. |
| Idle speed | 2950 rpm [1] | No-load speed. The table does not name the part measured or give speed under cutting load. |
| Deck | PP [1] | Polypropylene deck. Grade and UV or impact ratings are not listed. |
| Cutting width | 320 mm / 13 inch, as listed [1] | Width of the cut strip. Overall machine width is larger and not printed. |
| Cutting heights | 25 / 40 / 60 mm; three wheel positions [1] | Three fixed settings changed at the wheels. No central lever is listed. |
| Catcher | 27 L [1] [2] | Rear catcher, visible in the photograph. Filled weight is not listed. |
| Wheels | 5 / 6 inch front / rear [1] | Wheel sizes only; no slope or step limit is given. |
| Net / gross weight | 10.5 / 11.5 kg [1] | N.W. and G.W. as listed. Check the packed contents when you order. |
| Package | 540 × 380 × 290 mm [1] | Carton size, smaller than the assembled mower with handle and catcher. |
| Loading count | 512 / 1040 / 1170 [1] | Three Load Qty figures. The table does not label the container types, so ask DAYEE which is which. |
The three cutting heights
DAYEE names all three heights: 25, 40 and 60 mm, each set by wheel position. The gaps between them differ, and there is no central lever.
| Setting | What to ask for |
|---|---|
| 25 mm | The matching wheel position and the lawn conditions DAYEE recommends for a short cut. Finished height varies on uneven ground. |
| 40 mm | The wheel-position chart. Only these three settings are listed, so there is no in-between choice. |
| 60 mm | Confirmation of the setting and suitable grass conditions. The top setting is still a lawn height, so overgrown areas need cutting back first. |
| Changing height | The adjustment procedure with the mower unplugged, and how consistently each position sets. |
Sources [1]
PP deck, motor and servicing
The deck is PP plastic and the motor is an induction type wound with aluminium wire. DAYEE gives no PP grade, impact or UV test, motor efficiency, duty class, thermal protection or service life figure.
Ask for the motor and blade identification on the delivered mower, the approved cleaning and service steps, and part numbers for the blade, fixings, switch, wheels and catcher. The 2950 rpm entry is an idle speed. Labels in the photograph are too small to serve as conformity or noise data, so request those documents directly.
Catcher, weight and packing
DAYEE gives catcher volume, net and gross weight and carton size. Each one helps with a different planning step. Small mowers from other makers can be compared in our garden and forestry category.
| Figure | How to use it |
|---|---|
| 27 L catcher | Sized for small lawns. Ask how to fit, remove and empty it. Mulching or side discharge is not offered. |
| 10.5 kg net | Ask where to lift it; a full catcher adds weight. |
| 11.5 kg gross | Packed weight for freight. Ask DAYEE what is in the box. |
| 540 × 380 × 290 mm package | For carton and pallet planning. Ask for assembled and folded sizes for storage. |
Ordering and checking the delivered mower
Price, stock, warranty length and delivery date come from DAYEE's quote. Ask which container type each of the three loading counts refers to before booking freight.
Match the label and offer
Record model, voltage and frequency, plug and lead, motor and deck, height positions and catcher on the order. Other power or deck versions are different products.
Collect market documents
Assembly and operating manual plus the conformity and protection papers your market requires for this build.
Agree a working check
Set a grass condition and expected finish for a demonstration under the manual.
Plan receipt and service
Packed size and weight, assembly needed, parts list and written warranty terms, kept with the accepted configuration.
Buyer questions
Is there a cordless version with a battery?
This model is listed for 230 V / 50 Hz mains, and the photograph shows a power lead. No battery is listed. [1] [2]
How much electricity does the 900 W motor use?
DAYEE lists 900 W under Engine Power without saying how it was measured. Ask for rated input current if you need circuit planning figures. [1]
Are there heights between 25, 40 and 60 mm?
Only those three wheel positions are listed. Ask DAYEE for the adjustment instructions to confirm. [1]
Will it fit through a narrow gate?
The cut is 320 mm, but the whole mower with handle and catcher is wider. Ask DAYEE for the overall dimensions. [1]
Which container types do the loading counts refer to?
The table lists 512, 1040 and 1170 pieces without naming containers. Ask DAYEE to confirm before booking freight. [1]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Official DY13-900-00 specification table
manufacturer · Checked 2026-10-11
Supply, motor, deck, cut width, three height settings, catcher, weights, carton size and loading counts.
- Original DY13-900-00 photograph
manufacturer · Checked 2026-10-11
Shows the power lead, handle switch and attached rear catcher.
Report a correction through our contact form, quoting DY13-900-00 and the relevant specification.