CompareBuyer accountFor factories ↗Request a quote

Ningbo Daye Power Machinery Co., Ltd.

宁波大业动力机械有限公司

Ningbo Daye Power Machinery, based in Yuyao, sells DAYEE garden and ground-maintenance machines, including petrol tillers and battery remote-controlled mowers. Two model tables carry the numbers a buyer needs: the DY360-161PT-00 tiller and the DY210-3000SB-00 remote mower. Quote against one of those tables. The remote-mower brochure advertises a steeper slope for the whole series than the DY210 table gives, and the certificates shown on the website carry dates from 2019 to 2022, so ask for current documents with the quotation.

Jump to the information you need

DAYEE machines by job

Pick the machine by the work it has to do. A tiller works the soil; a remote mower cuts and drives over the ground. Their engine and motor figures are not comparable with each other.

[3][4][5]

Soil preparation

The DY360-161PT-00 is a petrol tiller with a 161 cc engine, one forward gear and a 360 mm tilling width. Tell DAYEE your soil condition and target depth, and get the rotary assembly that will actually ship. The packed size on the page is the carton, so ask for the assembled dimensions as well.

Remote mowing

The DY210-3000SB-00 is a battery-powered remote mower. Describe the vegetation, ground, turning space and access, and ask for the current stop and control instructions before planning work near the slope or range figures.

Company name, address and brand

The Chinese company name on the official site is 宁波大业动力机械有限公司, and the contact page gives a street address in Yuyao, Zhejiang. DAYEE is the brand on the website and in the brochure. Name this company as the contracting party on your quotation, and ask which site builds the machines.

The Yuyao award table also lists a garden-equipment company with a similar Chinese name in another row. Only the Daye Power entry belongs to this maker. The company introduction gives figures for staff, floor area, sales and certification; ask Daye Power for current versions of these if factory scale matters to your order.

[1][2][6]

DY360 tiller and DY210 remote mower: the published figures

The website names more tiller and remote-mower models than the two below. Ask for the table of any other model you want quoted; the figures here belong to these two builds only. Other remote builds named in the range include the DY210-224SB-00 crawler mower and the DY400-815SB-00 diesel crawler mower.

[3][4][5]
ModelWhat the table gives
DY360-161PT-00 tillerDY1P65FC engine, 161 cc, rated 2900 r/min, 360 mm tilling width and 260 mm tilling depth. Blade quantity is printed as 2 pcs, without saying what is counted. Ask for the blade drawing and the conditions behind the depth figure.
DY210-3000SB-00 remote mower3000 W power, 48 V / 40 Ah battery, 30–70 mm cutting height, 0–3 km/h speed and 25° maximum tilt, on the product page and in the brochure table. Ground, slope direction and test conditions are not printed.
DY210 width and rangeThe table prints 20 inch and 520 mm side by side; 20 inches is 508 mm. Remote distance is 500 m. Ask for the cutting-width drawing and the approved control conditions for your site.

Models and specifications

Quote the exact model, configuration and operating conditions together, and ask the factory to confirm current availability.

DAYEE CXD1600 Mains-Powered Leaf Collector

Catalogue reference: CXD1600

The DAYEE CXD1600 is a corded, hand-pushed leaf collector for 230 V / 50 Hz mains. An AC brush motor, listed at 1600 W idle power, draws leaves through a 40 cm (16 inch) front mouth and mulches them, by DAYEE's figure up to 10:1, into a 45 L bag. Four front-wheel positions set the intake height from 15 to 60 mm. Compact and light on packing, it suits small gardens, patios and paths within cable reach. This page goes through the supply and cord route, intake setup, the bag, how to read the idle figures, access and servicing, and the checks to make when it arrives.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY580-1600S-00 Dual-Battery Leaf Collector

Catalogue reference: DY580-1600S-00

The DAYEE DY580-1600S-00 is a cordless, self-propelled leaf collector. A brushless 1600 W motor runs from two 8 Ah battery packs, written as 40V+40V, and the machine drives itself at 3.6 km/h. The front intake has five height positions from 15 to 60 mm, and leaves are mulched (up to 10:1, DAYEE says) into a 150 L bag. Three optional kits widen its use: a DY580-01 scarifier, a DY580-02 brush and a DY580-03 hose. With no fuel or cord, it suits quiet leaf clearing on lawns and paved areas. This page covers battery and charging planning, intake setup, bag testing, the kits, drive controls and the delivery checklist.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY780-212S-00 Self-Propelled Leaf Collector

Catalogue reference: DY780-212S-00

The DAYEE DY780-212S-00 is a self-propelled petrol leaf collector for larger grounds. It drives itself at 3.6 km/h, works a 78 cm (30 inch) width and runs on a DH212 212 cc engine. A stepless front intake sets suction height anywhere from 15 to 85 mm, and leaves go into a 240 L rear bag with mulching of up to 10:1. DAYEE offers three extra kits: a DY780-01 scarifier cassette, a DY780-02 brush cassette and a DY780-03 hose. That lets one machine collect leaves, dethatch turf or sweep. The sections below cover choosing a mode, route planning, bag testing, kit servicing and the order details.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY13-900-00 Electric Lawn Mower

Catalogue reference: DY13-900-00

The DAYEE DY13-900-00 is a small corded electric lawn mower for 230 V / 50 Hz mains. A 900 W aluminium-wire induction motor drives the blade under a PP deck, cutting a 320 mm (13 inch) strip. You push it by hand and choose one of three cutting heights, 25, 40 or 60 mm, by wheel position. Clippings go into a 27 L rear catcher, and the mower weighs 10.5 kg net. It fits small lawns within reach of a power point. This page sets out the table, the supply and cord questions, the height settings, weight and packing, and the details DAYEE needs to quote.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY580-173P-00 Petrol Leaf Collector

Catalogue reference: DY580-173P-00

The DAYEE DY580-173P-00 is a hand-push petrol machine that vacuums leaves through a front intake into a 150 L rear bag, mulching them at up to 10:1 by DAYEE's figure. It works a 58 cm (23 inch) width and runs on DAYEE's own DY1P70FA 173 cc engine. Suction height adjusts at the front through five positions from 15 to 60 mm, and an optional DY580-03 hose kit reaches leaves the intake cannot. DAYEE lists it in its Walk Behind Leaf Blower Series. It suits clearing loose leaves from lawns, paths and yards. This page covers the full table, the engine page, bag handling, the hose option and what to send for a quote.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY162-131PB-06 Hand-Push Petrol Lawn Mower

Catalogue reference: DY162-131PB-06

The DAYEE DY162-131PB-06 is a hand-push petrol lawn mower from the Comfort Pro Series. It cuts a 410 mm (16 inch) strip, runs on a Ducar DV130 131 cc engine and collects grass into a 50 L rear catcher. Cutting height is set centrally from 25 to 75 mm in eight positions, and the steel deck rides on 6 inch front and 8 inch rear wheels. There is no gearbox: the operator pushes it. It suits maintained lawns where collected clippings are wanted. Below are the full table, how to plan the route and emptying, engine service, and what to send DAYEE for a quote.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY400-815SB-00 Diesel Crawler Mower

Catalogue reference: DY400-815SB-00

The DAYEE DY400-815SB-00 is a remote-controlled diesel crawler mower with a front swing-blade cutter 1000 mm wide. DAYEE lists a Chang Chai 195 engine described as horizontal, two-cylinder, four-stroke with electric start, swing-blade adjustment of 0–240 mm, 0–6 km/h travel, a maximum tilt of ≤45° and 150 m remote distance. The machine measures 1820 × 1140 × 760 mm and weighs 525 kg net, 555 kg gross. Start with the cutting job and the ground setting, then plan access and transport.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY330-764SB-00 Remote Crawler Mower

Catalogue reference: DY330-764SB-00

The DAYEE DY330-764SB-00 is a remote-controlled crawler mower with a Loncin 2P80 twin-cylinder 764 cc engine and two 1100 W driving motors. It carries two batteries: a 48 V / 20 Ah lead-acid pack for the drive and a 12 V / 24 Ah battery for starting. DAYEE lists an 838 mm cutting width, 30–150 mm cutting height, 0–4.3 km/h, remote control to 150 m, a 60° climbing angle and three hours of working time. Ask DAYEE for the conditions behind the climbing and run-time figures, and for the power-system documents.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY360-1000PL-00 Wheeled Leaf Collector

Catalogue reference: DY360-1000PL-00

The DAYEE DY360-1000PL-00 is a hand-push wheeled leaf collector in DAYEE's 40 V lithium series. It has a 1000 W brushless motor, one 40 V 4 Ah battery, stepless suction-height adjustment, a 45 L collection bag and a mulching ratio of up to 10:1. Idle air speed is 37.5 m/s and idle air volume 2200 m³/h, on 5 inch front and 6 inch rear wheels. It suits leaf cleanup on grounds and between orchard rows. Ask DAYEE about pickup on your leaves, bag-emptying stops and the battery and charger package.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY210-224SB-00 Remote Crawler Mower

Catalogue reference: DY210-224SB-00

The DAYEE DY210-224SB-00 is a remote-controlled crawler mower that pairs a 224 cc Loncin 1P75F petrol engine with two 600 W driving motors. DAYEE lists electric cutting-height adjustment from 30 to 105 mm, a 21 inch (530 mm) cutting width, 120 mm tracks, 0–5 km/h forward and backward, remote start and stop up to 200 m and a 20° maximum tilt. It weighs 156 kg net. For orchards and grounds work, settle the full power system, the permitted terrain and how the controller stops the machine before you order.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY360-161PT-00 Petrol Tiller

Catalogue reference: DY360-161PT-00

The DAYEE DY360-161PT-00 is a walk-behind petrol tiller with a DY1P65FC engine of 161 cc, rated at 2900 r/min, and one forward gear. DAYEE lists a 360 mm tilling width, a 260 mm tilling depth, a 1.3 L fuel tank and 0.6 L of engine oil. Blade quantity is printed as 2 pcs, and the 700 × 380 × 660 mm figure is the carton size. Use it for small-plot soil preparation, and settle the rotary assembly, depth conditions and assembled size with DAYEE before you order.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

DAYEE DY210-3000SB-00 Remote Mower

Catalogue reference: DY210-3000SB-00

The DAYEE DY210-3000SB-00 is a battery-powered remote-controlled mower with electric start. DAYEE lists a 3000 W power entry, a 48 V / 40 Ah battery, 30–70 mm cutting height, 0–3 km/h travel speed, 25° maximum tilt and 500 m remote distance. The machine measures 1050 × 980 × 470 mm and weighs 108 kg net. The cutting width is printed as 20 inch (520 mm), two figures that do not quite match. Below: the full table, how to read the slope and range figures, battery questions, and what to put in a quote request.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

Series slope claim and the DY210 figure

The brochure's introduction to the professional remote series advertises slopes up to 50° and remote control over 200 m. The DY210-3000SB-00 table next to it gives 25° maximum tilt and 500 m remote distance. For a DY210 order, work with the model figures: 25° and 500 m.

Ask DAYEE for the DY210 instructions that set the slope direction, traction, surface and vegetation conditions, battery state and the stopping response. Cross-slope travel, wet ground, work out of the operator's sight and obstacle avoidance are not covered in the brochure, so get them answered in writing. Any site trial should stay inside those instructions and be run by trained operators.

[4][5]

Specifying the DY360 tiller

The tiller page gives a depth figure but no soil conditions. Settle these four points with DAYEE before you order. Our guide to choosing a mini tiller or rotary cultivator explains how working width, depth and tine layout relate to plot size and soil.

[3]
  1. Describe the job

    Give the ground condition and the depth you need, including stones, roots or other obstacles. Engine size on its own does not tell you how the machine handles your soil.

  2. Name the rotary assembly

    Confirm the blade arrangement, what the 2 pcs quantity counts, the guards and the adjustment parts on a dimensioned parts drawing.

  3. Get assembled dimensions

    The 700 × 380 × 660 mm entry is the carton. Ask for assembled size, handle position and access needs before planning gates, transport or storage.

  4. Watch a representative run

    Record the build, soil, actual depth and operating method. Engine rated speed is separate from rotor speed, which the page does not give.

Certificates and audit documents on the website

The official site shows four certificate and audit images. All carry older dates, so request current copies from the issuing bodies with your quotation.

[7][8][9][10]
Document shownDate, scope and what to request
ISO quality certificateNames this company and address and covers design and manufacture of gasoline engines and garden tools, with export-only scope wording. Issued April 2019, valid through April 2022. Ask for the current certificate and surveillance record.
BSCI audit extractRecords an audit in July 2019 and points to the producer profile for validity. Ask for the current audit status. A social audit covers the workplace, not the product.
Engine-type approval pagesSingle pages from longer documents, with older test and signature dates. Ask for the full document, including the holder and model annex, and its present status for the engine in your machine.
Documents for your orderRequest a complete current set naming the contracting company, the model and build, the target market and the issuing body. Management-system and social-audit records are separate from product conformity.

Yuyao standard-drafting award

On 14 October 2021, Yuyao's market-supervision and finance authorities issued a joint notice on 2020 subsidies for manufacturing brands, standardization and quality awards. Its table lists 宁波大业动力机械有限公司 under leading the drafting of national standards. The scanned notice carries dated official seals.

The notice does not name the standard in that row, and it covers awards rather than products. The website also gives a current count of standards the company has led; if that matters to you, ask Daye Power for the standard codes and their publication records.

[1][6]

Is this a fit for your project?

Based on the manufacturer's published range.

A good fit for

  • Quotes for a petrol tiller or a battery remote mower from one Yuyao maker under the DAYEE brand.
  • Comparing the DY360 and DY210 against your job using full published model tables.
  • Buyers who value a company named in a 2020 Yuyao award for leading national-standard drafting.

Confirm in writing before ordering

  • Current operating limits and conformity documents for the exact build you order.
  • DY210 cutting width (20 inch or 520 mm), slope conditions and what the mower does when the remote link drops.
  • What the DY360's 2 pcs blade quantity counts, its assembled dimensions and the soil behind the 260 mm depth.
  • Current ISO and BSCI status, the battery and charger package, spares and warranty terms.

Building the offer: unit, instructions and support

The website gives no current warranty period, spares terms, shipping quote or lead time. Agree these for the build you order; older catalogue loading figures are no substitute for a quotation.

[2][3][4][5]
  1. Fix the build

    Get the exact model and revision, machine drawing, plate details, supplied parts and current operating and maintenance instructions. State which battery, charger or tiller attachments are included.

  2. Agree acceptance per machine

    For the mower, record cutting height, measured width, terrain and a control and stop demonstration. For the tiller, record soil, assembly and depth. Keep a separate acceptance record for each machine type.

  3. Set service responsibility

    Name who supplies blades, drive and control parts, battery or engine service information, and who handles faults. Get warranty and parts terms in writing.

  4. Plan transport and handover

    Separate net mass, packed gross mass and dimensions. Confirm packaging, receiving access, documents and commissioning duties for the order.

Questions buyers should settle

Can the DY210 mower work on 50° slopes?

The 50° figure belongs to the brochure's series introduction. The DY210 table gives 25° maximum tilt. Ask DAYEE for the slope direction and ground conditions behind that figure.

[4][5]
What does the Yuyao government notice cover?

It records a 2020 award to the company for leading national-standard drafting. For product conformity, ask for current documents for the model you buy.

[6]
Are the ISO and BSCI documents current?

The quality certificate shown ends in April 2022 and the audit extract records a July 2019 audit. Ask for current copies and check them with the issuers.

[7][8]
Will the DY360 tiller fit through my gate?

The page gives only the carton size, 700 × 380 × 660 mm. Ask for an assembled drawing showing handle and rotary arrangement.

[3]

Ningbo Daye Power Machinery Co., Ltd.

A useful inquiry starts with a clear task

Prepare the same requirement for each supplier. Add the exact model, configuration and acceptance conditions before comparing quotations.

Prepare a platform inquiry

Your entries stay on this page, are not uploaded or sent to a supplier, and clear after a reload. Copy or print to retain them.

Before comparing the order

0 of 6 essentials checked

Sources

Each source is listed with the date it was checked. Ask the factory to confirm current stock, certificates and approvals for your market.

[1]

Official Chinese company introduction

manufacturer · Record checked 2026-10-11

Chinese company name, with the company's own figures for staff, scale, sales and standards led.

[2]

Official contact and location page

manufacturer · Record checked 2026-10-11

English company name and the Yuyao street address.

[3]

Official DY360 tiller page

manufacturer · Record checked 2026-10-11

Model table with engine, tilling width and depth, blade quantity and carton size.

[4]

Official DY210 remote mower page

manufacturer · Record checked 2026-10-11

Model table with power, battery, cutting width in inches and millimetres, maximum tilt and remote distance.

[5]

Official remote-equipment catalogue, opening spread

manufacturer · Record checked 2026-10-11

Pages two and three: the professional-series slope and range claims and the DY210 model table.

[6]

Yuyao joint award-funding notice, October 2021

government · Record checked 2026-10-11

Four-page notice whose table lists the company for leading national-standard drafting in the awards for 2020.

[7]

Supplier-displayed historical quality certificate

manufacturer · Record checked 2026-10-11

ISO certificate naming the company and address, with export-only scope wording and validity ending April 2022.

[8]

Supplier-displayed social-audit extract

manufacturer · Record checked 2026-10-11

BSCI extract recording a July 2019 audit and pointing to the producer profile for validity.

[9]

Supplier-displayed engine approval excerpt 1

manufacturer · Record checked 2026-10-11

One page from a longer engine-type approval document, with older dates.

[10]

Supplier-displayed engine approval excerpt 2

manufacturer · Record checked 2026-10-11

A second single page from an engine approval document; ask for the full holder and model annex.

Report an outdated detail or a source mismatch ↗

Related buying guides

Choosing a walk-behind or self-propelled lawn mower for import

Keep your sourcing work together

Represent this factory? ↗
Page menu ↑
Share this pageLinkedInXFacebookWhatsAppTelegramRedditEmail