Tillage
DAYEE DY360-161PT-00 Petrol Tiller
The DAYEE DY360-161PT-00 is a walk-behind petrol tiller with a DY1P65FC engine of 161 cc, rated at 2900 r/min, and one forward gear. DAYEE lists a 360 mm tilling width, a 260 mm tilling depth, a 1.3 L fuel tank and 0.6 L of engine oil. Blade quantity is printed as 2 pcs, and the 700 × 380 × 660 mm figure is the carton size. Use it for small-plot soil preparation, and settle the rotary assembly, depth conditions and assembled size with DAYEE before you order.
Ningbo Daye Power Machinery Co., Ltd. ↗
Build my procurement briefYour soil and the 260 mm depth figure
DAYEE gives 260 mm as tilling depth without saying in what soil or after how many passes. Moisture, compaction, residues, stones and earlier cultivation all change what a small tiller reaches. Ask DAYEE which ground conditions the DY360 suits and what restrictions apply.
Tell the factory the result you need and the ground you have. Agree how depth is adjusted and measured under the current instructions, then record the actual depth, how loose the soil is and the number of passes. Hard, undisturbed ground may take more than one pass. Before settling on this build, our mini tiller and rotary cultivator buying guide sets out how plot size and soil steer the choice of width, depth and tine layout.
Sources [1]
What "2 pcs" means for the blades
The table says Blade Quantity: 2 pcs. It does not say whether that means two rotary assemblies, two sets or two single blades.
Ask for an exploded drawing showing the left and right assemblies, each replaceable blade, the fixings and the guards. Confirm the revision and the part numbers for spares. The engine plate in the official photo is unreadable, so the drawing is the reference for what ships.
Sources [1]
Engine figures and the rotary drive
The page names the engine and one forward gear. It has no drive diagram, reverse gear or speed selection.
| Published entry | What to ask |
|---|---|
| DY1P65FC / 161 cc | Engine identity only. Ask for the exact engine build and its operating instructions. |
| 2900 r/min rated speed | This is engine speed. Ask for the drive ratio and rotor operating speed if you are comparing tillers. |
| One forward gear | No travel speed, reverse or clutch and stop behaviour is listed. Ask for the control and drive instructions. |
| Engine power and torque | No power, rotor torque or area output is listed. Ask DAYEE for these figures if you need them. |
Sources [1]
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Exact model | DY360-161PT-00 [1] | The figures below belong to this model. DAYEE also lists 173-engine and PT03 tillers; ask for their own tables. |
| Gears | One forward gear [1] | The page lists no reverse, gear ratio or ground speed. |
| Engine | DY1P65FC; 161 cc [1] | Engine model and displacement. Check that the plate and manual on the delivered unit match. |
| Rated engine speed | 2900 r/min [1] | Engine speed. Rotor speed depends on the transmission ratio, which is not listed. |
| Tilling width | 360 mm [1] | Width of the worked strip. The overall machine is wider; ask for the external width if access is tight. |
| Tilling depth | 260 mm [1] | No soil, pass count or adjustment setting is given with this figure. |
| Blade quantity as printed | 2 pcs [1] | The page does not say whether this counts assemblies, sets or single tines. Order spare blades from the rotary-assembly drawing. |
| Fuel tank | 1.3 L [1] | Tank volume. Fuel grade and consumption come from the engine manual. |
| Engine oil | 0.6 L [1] | Oil volume. Fill to the level mark in the engine manual. |
| Carton dimensions | 700 × 380 × 660 mm [1] | Carton size. Assembled size, net mass and handling points are not on the page. |
Running a demonstration
A good demonstration uses the exact build, the approved operating method and ground like yours. Set it up this way.
Check the build
Match the model and engine plates, rotary drawing, guards and adjustment parts to the order. Note anything missing or different before starting.
Get the adjustment method
Obtain the current method for setting and checking depth, using the controls and stopping.
Work a typical plot
Within the instructions, record ground condition, depth setting, passes and the result. Agree how depth will be measured beforehand.
Check handling
Watch turning and headland moves with your operator and access. With one forward gear and no listed reverse, see how the machine is backed out of a row.
Sources [1]
Working width and area per hour
DAYEE gives the 360 mm working width but no travel speed, pass count or hourly output. Area per hour from width times a guessed walking pace is only an estimate.
To compare machines, use the same ground and the same finished result. Record overlap, turns, extra passes, stops and the area you accept. If access is narrow, ask for the assembled external width and handle position too: the machine is wider than its working strip.
Sources [1]
Fuel, oil and servicing
The page gives 1.3 L fuel and 0.6 L oil. Order the engine manual with the machine for the rest. If a mower goes in the same shipment, the DY210-3000SB-00 remote mower page holds this maker's other detailed table.
| Table figure | What to get for operation and service |
|---|---|
| Fuel and running time | Fuel grade, filling and storage instructions, and a running-time figure if DAYEE has one. Tank volume alone does not give hours of tilling. |
| Oil and level check | The approved oil grade and the level-check procedure; fill to the mark. |
| Service parts | Filters, starting and ignition parts, drive service items and replacement blades for this model, with service intervals from the manual. |
| Stops and blockages | The current stop, blockage-clearing and restart instructions, and which safety interlocks the machine has. |
Sources [1]
Buyer questions
Does 2 pcs mean two blades?
The page does not say what is counted. Ask for the rotary-assembly and spare-parts drawing before ordering blades. [1]
Is 2900 r/min the rotor speed?
No. It is the rated engine speed. Ask DAYEE for the drive ratio to get rotor speed. [1]
Will it reach 260 mm in one pass?
The page gives no soil or pass count with that figure. Ask DAYEE to confirm the ground conditions and agree a depth check in a demonstration. [1]
Will the assembled tiller fit through my gate?
The page gives only the carton size. Ask for assembled external dimensions with the handle position. [1]
Packing, assembly and supply terms
The page gives the 700 × 380 × 660 mm carton and container-loading quantities. Net and gross mass and lifting instructions are missing. DAYEE also uses the DY360 prefix on the DY360-1000PL-00 wheeled leaf collector, so write the full model code on every document.
Assembled drawing
Overall dimensions with handle and rotary fitted, and the space needed to work and service the tiller.
Packed order
What is folded, removed or boxed separately, the packed mass and handling instructions.
Assembly and handover
Who reassembles removed parts, checks the machine, supplies instructions and shows the operator how to use it.
Current terms
Price, delivery, warranty, parts and acceptance for your exact build. The website loading figures are a guide; get a shipping quote and lead time on the offer.
Sources [1]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Official DY360 petrol-tiller product page
manufacturer · Checked 2026-10-11
Model description and full table: engine, gear, width, depth, blade quantity, fuel and oil volumes and carton size.
Report a correction through our contact form, quoting DY360-161PT-00 and the relevant specification.