Garden & forestry
DAYEE DY162-131PB-06 Hand-Push Petrol Lawn Mower
The DAYEE DY162-131PB-06 is a hand-push petrol lawn mower from the Comfort Pro Series. It cuts a 410 mm (16 inch) strip, runs on a Ducar DV130 131 cc engine and collects grass into a 50 L rear catcher. Cutting height is set centrally from 25 to 75 mm in eight positions, and the steel deck rides on 6 inch front and 8 inch rear wheels. There is no gearbox: the operator pushes it. It suits maintained lawns where collected clippings are wanted. Below are the full table, how to plan the route and emptying, engine service, and what to send DAYEE for a quote.
Ningbo Daye Power Machinery Co., Ltd. ↗
Build my procurement briefIs a push mower right for your lawn?
The PB model has no wheel drive. Its engine turns the blade, and the operator walks it forward. DAYEE sells the DY162-131SB-06 with the same 131 cc engine as a self-propelled alternative.
A push mower works well on level, regularly cut grass with short runs between areas. On long routes, steep banks or heavy daily use, ask DAYEE whether the SB model is the better buy. Another powered-drive machine to weigh on those sites is the Sinharbour HG48SMH Self-Propelled Mower. Pushing force, maximum slope and area per day are not published for this model, and the slope angles DAYEE gives for its remote crawlers belong to those machines only.
Cut width, gates and storage
The 410 mm figure is the width of grass cut in one pass. The machine body, handle and rear catcher take up more room, and DAYEE does not print an overall width or turning space. For a lawn within reach of a power supply, DAYEE also lists the DY13-900-00 electric lawn mower.
| Site question | What to ask DAYEE for |
|---|---|
| Gates and storage | Overall working and folded dimensions with the catcher fitted, so you can check narrow gates and shed doors. |
| Beds and obstacles | The machine envelope, compared with the space you have to turn around beds and fixed objects. |
| Uneven ground | Guidance on bumps, soft ground and step heights. Wheel sizes alone set no limit. |
| Moving between sites | Net and packed weight with handling instructions, so you know whether one person can lift it. |
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Model and series | DY162-131PB-06; Comfort Pro Series in the 2026 brochure [1] [2] | First column on brochure page 7 (printed page 3). The SB and 150 cc variants beside it have their own figures. |
| Drive and gearbox | Hand Push; Gear Box N/A [1] [2] | The operator pushes the machine. The self-propelled version is the DY162-131SB-06. |
| Cut width | 16 inch / 410 mm, as listed [1] [2] | DAYEE pairs these two figures. They describe the cutting strip; the overall machine is wider. |
| Engine | Ducar DV130; 131 cc [1] [2] | The table gives no kW or hp rating, fuel consumption or starting system. |
| Rated speed | 2800 rpm [1] [2] | Engine or blade speed? The table leaves that open. Ask DAYEE if it matters for your job. |
| Deck | Steel [1] [2] | Thickness, grade and coating are not listed. |
| Cutting height | 25–75 mm; eight positions; central adjustment [1] [2] | One lever sets all wheels. The individual step heights are not listed. |
| Cutting and collection | Rear Collection; 50 L grass catcher [1] [2] | Rear collection is the only method listed. No mulching or side-discharge kit appears in the table. |
| Handle | Three positions [1] [2] | Handle heights and folded size are not given. |
| Wheels | 6 inch front / 8 inch rear [1] [2] | Larger rear wheels help on lawn; the table sets no slope or step limit. |
| Fuel and oil | Fuel tank 1 L; Oil Tank Capacity 0.45 L [1] [2] | Two separate entries. Oil grade and fill level come from the engine manual. |
| Lithium battery | N/A [1] [2] | No battery pack is listed for this petrol model. |
| Carton | 720 × 520 × 440 mm [1] [2] | Shipping carton size. Net and packed weight are not in the table. |
| Container loading | 175 / 355 / 426 pieces for 20 ft / 40 ft / 40 ft HQ [1] [2] | DAYEE's packing counts per container, useful for pricing freight. |
Setting the cutting height
One central lever sets the deck between 25 and 75 mm across eight positions. DAYEE lists the end points only, so the steps in between may not be equal.
Ask for the height chart and setting procedure for the delivered mower. If you plan a demonstration, agree the grass condition and the finish you expect. The table gives no first-cut height for long, damp or dense grass.
Collecting and emptying grass
Clippings go into a 50 L rear catcher. To benchmark this cut and catcher against other makers' machines, browse our garden and forestry category. Volume is the only figure listed; DAYEE gives no fill time or collected weight.
Choose the finish
Decide whether clippings must leave the site. Mulching, side discharge or a conversion kit is not offered in this configuration.
Describe the grass
Tell DAYEE how long, wet or dense the grass usually is. The table has no wet-grass rating or maximum grass length.
Plan the emptying route
Note where the catcher will be emptied and ask for removal and refitting instructions. How often you stop depends on your grass.
Check the delivered kit
On arrival, confirm the catcher and its mounting match the order and that it collects as agreed under the manual.
Ducar DV130 engine and service parts
This model takes the Ducar DV130 at 131 cc. The same brochure page lists a DV150 (150 cc) and a B&S 300E (125 cc) for other variants, so order parts against the DV130.
| Engine detail | What to request for your order |
|---|---|
| Engine assembly | The nameplate model and revision, the engine manual and the starting controls supplied. The table has no starting-type row or output rating. |
| Fuel and oil | The 1 L fuel tank and 0.45 L oil entry are separate. Ask for oil grade, fill level and the maintenance schedule. |
| Speed and output | What the 2800 rpm row measures and, if you need it, the rated engine output. |
| Spare parts | Engine and machine parts lists for your version: blade, mounting hardware, cables and catcher parts. Service intervals and warranty length are not printed. |
Controls, deck and manuals
The product photograph shows the rear catcher, handle controls, central height lever and steel deck. Lever functions, blade stopping time, noise and vibration figures and market conformity papers are not given. The three handle positions have no listed heights either.
Ask DAYEE for the assembly and operating manual for this model and the documents your market requires. Check the controls, guards and catcher against the manual on delivery. Blade stopping, catcher access and servicing all follow that manual.
Packing, order and acceptance
The 720 × 520 × 440 mm carton and container counts help with freight quotes. Machine weight, lead time, price and box contents still need to come from DAYEE.
| Order step | What to agree for DY162-131PB-06 |
|---|---|
| Packing and arrival | Packed weight, carton contents, assembly needed, whether oil is shipped and any handling needs. Oil, tools and a spare blade are not listed as included. |
| Configuration | Model number, DV130 engine, hand-push drive, central height lever and rear catcher, all named on the order. A self-propelled or different-engine variant is a different product. |
| Performance | The grass condition and finish for any agreed demonstration under the manual. |
| Support | Written warranty and defect terms, plus spare-parts and service documents for this model. |
Buyer questions
Is this mower self-propelled?
No. The DY162-131PB-06 table lists Hand Push with Gear Box N/A. The self-propelled model is the DY162-131SB-06. [1] [2]
Can I order it as a mulching mower?
Only rear collection is listed. If you need mulching parts or another discharge method, ask DAYEE to confirm the configuration in writing. [1] [2]
Are the eight height positions evenly spaced?
DAYEE gives the range of 25–75 mm and the count of eight. Ask for the height chart to see each step. [1] [2]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Official DY162-131PB-06 product table
manufacturer · Checked 2026-10-11
Full specification table for this model: drive, cut width, engine, height range, catcher, wheels, carton and container counts.
- Original DAYEE 2026 brochure, page 7 (printed 3)
manufacturer · Checked 2026-10-11
Comfort Pro Series page with the hand-push model in the first column beside its self-propelled and larger-engine variants.
- Original DY162-131PB-06 product photograph
manufacturer · Checked 2026-10-11
Shows the rear catcher, handle controls, height lever and steel deck.
Report a correction through our contact form, quoting DY162-131PB-06 and the relevant specification.