Zhejiang Sunyoung Machinery Co., Ltd.

Sunyoung 6CLXL240 Continuous Tea-Strip Shaping Machine

Catalogue reference: 6CLXL240 (brochure reference)

Sunyoung's continuous shaping module forms high-grade strip tea as it moves forward through heated troughs, with two or three machines linked head to tail. The troughs are 201 stainless steel of equal width, heated by electric tubes underneath, and Sunyoung claims a left-to-right temperature difference within ±0.5°C. The brochure model is the 6CLXL240: 45 kW heating and 0.75 kW base power per unit, 2650 × 1830 × 980 mm, and ≥50 kg/h. Elevators, a cooling conveyor and control and power cabinets complete the line. Adding units adds shaping stages, so ask how output is counted for the full line.

Sunyoung 6CHT-80 / 6CHT-100 Dynamic Hot-Air Tea Dewatering Dryer

Catalogue reference: 6CHT-80 / 6CHT-100 (brochure references)

The Sunyoung 6CHT tumbles tea in a rotating drum through hot air for continuous first-stage dewatering, and Sunyoung says it also breaks up clumps left after rolling. The brochure lists the 6CHT-80 at ≥200 kg/h and the 6CHT-100 at ≥500 kg/h, both on a fresh-leaf handling basis, so neither figure is dry-tea output. Each model runs on wood or coal, electric heating, or gas (natural gas or LPG), and the heat source changes base power and floor layout. Wood and coal builds also need a 5 × 5 m furnace room. The sections below set out heat, power and layout, then how to test dewatering and clump breakup on your own rolled tea.

Sunyoung Continuous Drum Tea Aroma Machine

Sunyoung's continuous aroma machine lifts tea on a feed conveyor into an enclosed rotating drum, warms it with far-infrared ceramic heating panels while guide ribs keep the leaf moving, and discharges onto a cooling conveyor. Integrated controls tie the three together, so tea flows through without stopping, unlike a batch aroma cabinet. Sunyoung promises even heating, quick moisture release, good ventilation and little breakage. The product page carries no model code, hourly output or heating schedule, so plan a demonstration with your own tea and ask for a written specification of the module offered.

Sunyoung Tea Heating Furnaces: Gas, DRL Electric, FP and GRFL Solid-Fuel

Catalogue reference: Gas, DRL electric, FP and GRFL solid-fuel furnaces

Sunyoung supplies three kinds of heat source for tea machines: gas direct furnaces (ZRFL and GRFL120-Qt), DRL electric heaters from 15 to 180 kW, and FP and GRFL hot-air furnaces burning wood, coal or pellets. The current table pairs each furnace with dryers, aroma equipment or 6CSF hot-air fixing machines, and lists fuel use, efficiency and size. Pick the receiving tea machine first, then the fuel your site can supply. A few points need a written answer: which gas the kg/h figures mean, the shared DRL-120/135 cell, and what the size columns measure.

Sunyoung 6CS Tea Conveyors and 44T / 100T Elevators

Catalogue reference: 6CS B/P/W/Z conveyors; 44T / 100T elevators

Sunyoung builds five kinds of tea conveyor to link processing machines: cleated belts (6CS25B, 45B, 60B), inclined elevators (44T, 100T), level belts (6CS25P to 90P), mesh-belt cooling elevators (6CS50W, 60W) and vibrating conveyors (6CS28Z, 33Z, 50Z). Besides moving leaf, they feed and balance flow between stages. The brochure gives belt speeds, motor power and hourly rates from ≥80 to ≥300 kg/h, plus a shared tea-leakage limit of ≤5.0%. Start by describing the machine the leaf leaves and the machine that receives it, then pick the form, the extras and the cooling duty.

Sunyoung 6CSFT Infrared Tea Fixation Module

Catalogue reference: 6CSFT-60 / 6CSFT-80

The Sunyoung 6CSFT fixes green tea in a drum heated by infrared, with high-temperature hot air as a helper. Sunyoung aims it at fixing stems thoroughly without scorching the leaf, and fits storage, metering and even-feed devices ahead of the drum. The brochure lists two sizes: the 6CSFT-60 at ≥50 kg/h and the 6CSFT-80 at ≥120 kg/h of fresh leaf. Heating is gas or electric. Two items need a written answer before you compare quotes: the base-power cells (1.6 and 1.72) carry no unit, and each size entry prints three numbers under a two-axis heading. The low-energy claim also comes without a measured figure.

Sunyoung 6CSF Hot-Air Tea Fixation Module

Catalogue reference: 6CSF-80 / 6CSF-100 / 6CSF-120

The Sunyoung 6CSF is a hot-air tea fixation module: a fresh-leaf feed conveyor, a high-temperature hot-air drum, a cooling conveyor and integrated controls. The brochure offers three sizes. The 6CSF-80 handles at least 100 kg/h of fresh leaf and the 6CSF-100 at least 400 kg/h of fresh leaf, while the 6CSF-120 row reads at least 600 kg/h of dry leaf. Heat comes from solid fuel, electric heating or gas depending on the model, and each heat source changes the base power and floor layout. Below are the capacity rows, fuel rates, straight and bent layouts, a leaf trial plan and what to put in a quote request.

Sunyoung 6CRZ-55 Automatic Tea Rolling Module

Catalogue reference: 6CRZ-55 (brochure module example)

Sunyoung's automatic tea-rolling module groups several automatic rollers with feeding and discharge conveyors and one control program. Rollers come in sizes 40, 55 and 65 and stand in one or two rows, with the number chosen to suit your production. The brochure example, 6CRZ-55, takes 30 kg of fixed leaf per barrel. That is a batch charge; output per hour depends on the rolling cycle and how many barrels you install. Weighing, variable-speed rolling, programmed feeding and pressure and powered discharge are automatic, with a manual mode as well. Plan the batch schedule and the conveyor route with Sunyoung.

Sunyoung 6CEF-40H Cooling and Wind-Selection Module

Catalogue reference: 6CEF-40H (brochure reference)

The 6CEF-40H is a line stage in Sunyoung's tea plants that does two jobs at once. Leaf passing through an air box meets cool air and cools further, while separate airflow zones blow out yellow leaves and single leaves that would not suit the next secondary-tea process. A feed conveyor, the wind-selection machine, a discharge conveyor and a unit control cabinet make up the module. The brochure gives 1.59 kW electric base power, ≥200 kg/h and a 6877 × 610 × 2670 mm straight-connected envelope. It is a separate item from the stand-alone EF-40 and EF-40G sorters.

Sunyoung 6CZS-65 Steam and Hot-Air Tea Fixation Module

Catalogue reference: 6CZS-65 (brochure reference)

Sunyoung's steam fixation module kills enzymes in fresh tea leaf with high-temperature steam, then dries the wet leaf with hot air, in one continuous run. An integrated furnace raises heat and steam, and integrated controls manage the stages. The brochure reference, 6CZS-65, burns coal or gas, has 2.75 kW base power and a rate of ≥100 kg/h. Its 7700 × 940 × 1600 mm dimensions leave out the chimney and furnace, so plan extra room for both. Sunyoung quotes steam at 120–180°C and hot air at 130–160°C, each "and above", and about 60% leaf moisture after the process.

Sunyoung 6CHC Tea Resting and Moisture Equalization Module

Catalogue reference: 6CHC-10k / 6CHC-20k / 6CHC-25k

Sunyoung's 回潮 module rests tea leaf on layered mesh belts so moisture can even out before further frying and shaping. Leaf comes in on a feed conveyor, is spread by a mobile distributor, rests on the belts for an adjustable 40–120 minutes, and leaves on a discharge conveyor under integrated controls. Moisture redistributes naturally; no spray or steam unit is listed. The brochure rates the 6CHC-10k, -20k and -25k at ≥100, ≥300 and ≥400 kg/h. Air conditioning can be added. Ask Sunyoung which rate holds at the resting time your tea needs.

Sunyoung 6CWD-20/50/100 Multi-Layer Circulating Tea Withering Module

Catalogue reference: 6CWD-20 / 6CWD-50 / 6CWD-100

Sunyoung's multi-layer circulating withering module stacks spreading layers in one machine. A feed conveyor and a reciprocating flat conveyor distribute fresh leaf, the layered machine withers and circulates it, and a flat conveyor and integrated controls take it out. Brochure rows 6CWD-20, -50 and -100 hold 200, 500 and 1000 kg per batch; those are batch loads, and hourly output depends on cycle time. Two extras can be configured: variable-colour light radiation and near-infrared online moisture detection. Price them as named options with their own acceptance terms.

Sunyoung 6CWD-11 Single-Layer Tea Withering Module

Catalogue reference: 6CWD-11 (brochure reference)

Sunyoung builds a single-layer leaf-spreading and withering module for fresh tea. Troughs are fed by a mobile conveyor running on a rail with an electrical slide, and a discharge conveyor and integrated controls pass the leaf on. The brochure example, 6CWD-11, has 11 m² of spreading area on a 1150 mm mesh belt inside an 11500 × 1380 × 1000 mm envelope. The current web page adds automatic weighing with a 0.2–0.3% error and an air-speed spread of no more than 0.5 m/s. No hourly output is published, so quote by trough count, loading route, weighing package and how leaf leaves the trough.

Sunyoung 6CCGQ Double-Pot Tea Shapers

Catalogue reference: 6CCGQ-50 / 6CCGQ-60

Sunyoung's 6CCGQ-50 and 6CCGQ-60 are electric double-pot machines for shaping and frying curled and ball-shaped specialty tea. Sunyoung fits cast-iron pots, which it says hold their shape when hot better than pressed pots. Speed is set by gear shift on the 50 and by variable frequency on the 60. Heaters are 7.6 and 10.6 kW, motors 0.55 and 1.1 kW. One table entry needs clearing up: the output column is headed kg/h, yet the cells read 2 kg and 5 kg of initially dried leaf. Here you will find the two models side by side, the pot question, a two-pot trial and service details.

Sunyoung 6CCP Bottle-Shaped Tea Frying Drums

Catalogue reference: 6CCP-60 / 6CCP-110

Sunyoung's 6CCP-60 and 6CCP-110 are bottle-shaped drums that fry and dry tea while rolling it into tight strips, a job aimed mainly at tight-strip fried green tea. The drum is conical, which Sunyoung credits for tighter, finer strips. Each size comes as a fuel build or an electric build with its own dimensions. Electric heaters are 10.5 kW on the 60 and 36.5 kW on the 110, with drive motors of 0.55 and 1.1 kW. Listed rates are ≥7 and ≥30 kg/h. This page lays out the builds, the hourly figures, a leaf trial and the order scope.

Sunyoung 6CHP-941 Round-Bowl Tea Roasters

Catalogue reference: 6CHP-941II (three bowls) / 6CHP-941I (five bowls)

Sunyoung builds its round-bowl tea roaster for Biluochun-type tea and fine Maofeng-type tea, in a three-bowl 6CHP-941II and a five-bowl 6CHP-941I. Every bowl has its own airflow, temperature and start/stop control, so several small lots can run side by side. Each bowl carries 6 kW of heating, which adds up to 18 kW on the three-bowl machine and 30 kW on the five-bowl one. Listed rates are ≥8 and ≥15 kg/h. This page compares the two versions and covers bowl accessories, loading, a bowl-by-bowl trial and the service items to agree.

Sunyoung 6CTH-6.0 Tea Aroma Finishing Cabinet

Catalogue reference: 6CTH-6.0

The Sunyoung 6CTH-6.0 is an electric cabinet for the last stage of tea processing, where the leaf is given its final aroma and roast. It has 15 kW of heating, 12 tray layers and a listed rate of 45 kg/h in an outer size of 1140 × 880 × 1980 mm. Hot air circulates through the chamber, the trays rotate, the air is exchanged on a timer and an alarm sounds at the end of the set time. Sunyoung also lists sterilization among its uses. Read on for what the figures cover, how to set up a loaded trial and what to put in the quotation.

Sunyoung 6CLZ Green Tea Strip Shapers

Catalogue reference: 6CLZ-60/8(11) / 6CLZ-80/14(18)

The Sunyoung 6CLZ is an electrically heated trough machine for shaping fine green tea into tight, straight strips. Two rows are listed. The 6CLZ-60/8(11) has a 0.55 kW motor and 8 kW of heating for ≥8 kg/h. The 6CLZ-80/14(18) has a 1.1 kW motor and 21.6 kW of heating for ≥12 kg/h. Temperature and speed are both adjustable. Sunyoung also prints a four-machine vibratory line built on the 80 model. This page compares the two machines, explains what to pin down about the troughs and charge, and sets out the line package.

Sunyoung 6CHB Continuous Tea Dryers

Catalogue reference: 6CHB-3 / 6CHB-6 / 6CHB-10 / 6CHB-20

The Sunyoung 6CHB is a continuous plate dryer for tea, built in four sizes: 6CHB-3, 6CHB-6, 6CHB-10 and 6CHB-20. Plates carry the leaf through the box at a speed set by an electromagnetic adjuster, and a large-flow main fan moves the air. Motor power runs from 0.55 to 1.1 kW and listed output from ≥12 to ≥35 kg/h. Heat can come from coal, electricity or gas, and the table adds reference consumption for electric, LPG and natural-gas heating. Below are the sizes, the fuel figures, the plate options and the points to settle in your quotation.

Sunyoung EF-40 / EF-40G Tea Air Sorters

Catalogue reference: EF-40 / EF-40G (6CEF-40 / 6CEF-40G)

Sunyoung's EF-40 and EF-40G air sorters split tea into lighter and heavier fractions, for primary or refined processing. Both rows list 250–400 kg/h. The 40 has a 1.5 kW motor and measures 3630 × 565 × 1685 mm; the 40G has 0.8 kW and measures 4348 × 560 × 2688 mm. The brochure prints the same figures as 6CEF-40 and 6CEF-40G. Sunyoung says the machines remove more than 90% of yellow leaves and fines. Confirm the model name with Sunyoung, then judge the machine on a weighed trial with your own tea that measures both removal and good-leaf recovery.

Sunyoung 6CFJ Continuous Black-Tea Fermentation Module

Catalogue reference: 6CFJ6 /6CFJ20 /6CFJ40

Sunyoung's 6CFJ module ferments rolled black tea continuously. Leaf rides a feed conveyor into a multi-layer belt machine inside an enclosed room, where environmental equipment supplies air, warmth and humidity under one control system. The brochure lists three sizes: 6CFJ6 with 3 belt layers and 4 kW total power, and 6CFJ20 and 6CFJ40 with 5 layers at 19 and 20 kW. The larger two are room-scale projects over 10 m long. Buy it as a line project: define the incoming leaf, the residence programme, the room services and the discharge to the next stage together.

Sunyoung 6CJW-40 / 6CJW-50 Tea Clump Breakers

Catalogue reference: 6CJW-40 /6CJW-50

Sunyoung's 6CJW-40 and 6CJW-50 sit between the tea roller and the shaping or drying stage. They break up the lumps that form during rolling and split the loosened leaf by size. The 40 has a 0.37 kW motor, a ≥300 kg/h catalogue rate and measures 600 × 380 × 790 mm; the 50 has 0.75 kW, ≥400 kg/h and 830 × 830 × 1580 mm. The brochure supplies the kW and mm units the web image leaves out. Before ordering, agree the feed method from your roller, the separation outlets and how the loosened tea will be judged.

Sunyoung 6CHFJ-5B / 6CHFJ-10B Black-Tea Fermentation Machines

Catalogue reference: 6CHFJ-5B /6CHFJ-10B

Sunyoung's 6CHFJ-5B and 6CHFJ-10B are electric cabinets for controlled black-tea fermentation, aimed at small and medium processors. They regulate temperature, humidity and fermentation time and change the air on a timer. The 5B offers 4.8 m² of effective leaf-spreading area and the 10B 9.6 m², both with 2 kW heating. Capacity is printed as 175 and 350, but the website table gives kg per batch while the brochure gives kg/h under the names 6CHF-5B and 6CHF-10B. Settle the model name and capacity unit with Sunyoung before ordering, then run a loaded control trial.

Sunyoung 6CR Tea Rollers

Catalogue reference: 6CR-30 / 6CR-35 / 6CR-40 / 6CR-55 / 6CR-65 / 6CR-75

Sunyoung's 6CR rollers twist fixed or withered tea leaves into strips. The maker's table covers six machines, from the copper 6CR-30 at ≥4 kg per batch and 0.37 kW up to the stainless 6CR-75 at ≥100 kg per batch and 5.5 kW. Rows differ in material, motor, batch size, footprint and whether pressure comes from a single or double arm. Pick by batch size and arm type, then work out hourly line output from a timed trial with your own leaf, because the table gives batch figures only.

Sunyoung 6CST-40 Drum Tea Fixation Machine

Catalogue reference: 6CST-40

The Sunyoung 6CST-40 is the smallest model in the maker's drum tea-fixation table. It runs continuous fixation, sits on three-wheel support shared with the 50 size, and lets the operator adjust process parameters. The table offers firewood/coal or electric heating, a 0.55 kW drive motor, an electric reference energy entry of 20.5 kW/h and a reference output of at least 25 kg/h. Order it with one chosen heating set-up, a utility schedule for that set-up, and a fixation trial on your own leaf.