Anji Yuanfeng Tea Machinery Co., Ltd.
安吉元丰茶叶机械有限公司
Anji Yuanfeng Tea Machinery builds tea-processing equipment in Anji, Zhejiang. Its main offer is an automated line for Anji white tea that links shaping, air classification, conditioning and drying, with touchscreen control and automatic feed and discharge. It also sells the machines one by one. Yuanfeng prices a line against a defined process, so send your tea, your incoming leaf and the stages you need, and ask for a numbered module list with capacity and utility loads.
Anji Baicha is a green tea: name your process
Anji Baicha is made from Baiye No. 1 leaves. An account hosted by the Ministry of Agriculture classes it as a green tea and lists fixation among its processing steps. The pale leaf gives the tea its name; the method is still green-tea processing, which differs from the separate white-tea category. Yuanfeng's line is built for Anji Baicha, so an English enquiry that only says "white tea line" may point the quote at the wrong process.
In your enquiry, name the tea you will make, the state of the leaf on arrival and the operations you need. Ask Yuanfeng to mark fixation, shaping, conditioning, drying and any other agreed stage on its proposal, including stages that another supplier will provide. Tea quality targets belong in the acceptance terms of the contract.
[6]What the white tea line links together
Yuanfeng says its line joins tea shaping, air classification, conditioning and drying into one run. The line is run from a touchscreen with electrical control, and leaf is fed in and discharged automatically. Use the stages below to build your module list. For each one, ask for the named machine and its settings.
[1][2]| Stage Yuanfeng describes | Ask for in the line quote |
|---|---|
| Tea shaping | Ask which machine shapes your tea and how it is handled. Request its feed and discharge connection and its operating settings. |
| Air classification | Say what you need separated and where the step sits in your process. Ask for the installed machine and how leaf moves in and out. |
| Conditioning | Describe the tea entering and leaving this stage. Request the matching single-machine reference and its specification. |
| Drying | Give the final condition you want, then ask for the dryer, its heat source, controls and exhaust needs. |
| Automatic feed and discharge | List the conveyors and transfer equipment in the quote, where the control system ends and which jobs stay manual. |
Full line, added machine or modification
Yuanfeng sells single machines as well as complete lines. Its product entry for the conditioning machine reuses much of the line text and gives no separate capacity or connection data, so request a dedicated sheet if you are buying that machine alone. A stand-alone alternative from another maker is the Sunyoung 6CHC Tea Resting and Moisture Equalization Module. Pick the case below that matches your order.
[2][3]A new complete installation
Ask for a numbered module list, an arrangement drawing, a combined utility schedule and the controls and transfer equipment that come with it.
A machine added to an existing line
Send the machines before and after it, the tea condition, the free floor space and the connections. Request the specification of the matching single machine.
A control or process change
Describe the current equipment and the change you want. Agree the revised drawing and control logic, the updated manuals and a sample run before you sign off the design.
Capacity and utilities come with the quotation
The line page gives no model schedule, electrical load, heat-source requirement or rated output. Words such as "continuous processing" and "automatic" describe the design. Throughput, staffing and energy use are figures to agree in the quotation.
When Yuanfeng quotes a rate, ask whether it counts incoming fresh leaf or finished tea, and which tea condition and process settings it assumes. Request connected and running loads for each module, the utility connections and the installed layout. A neighbouring product page will not supply these, so get them for the line you are buying.
[2]Models and specifications
Quote the exact model, configuration and operating conditions together, and ask the factory to confirm current availability.
Yuanfeng Automated Anji White Tea Line
Yuanfeng builds an automated equipment line for Anji white tea. It links shaping, air sorting, reconditioning and drying, runs from a touch-screen electrical control panel and feeds and discharges leaf automatically. Yuanfeng sells it as an engineered project with no single model code or fixed rating, so capacity, utility loads and the process drawing come with your quotation. This page covers the tea process to specify, the handover between stages, the control scope, a trial run for acceptance and the site works to put in the contract.
- Material processed
- White tea
- Control system
- Touchscreen and electrical control
- Material feeding
- Automatic feeding and tea discharge
Company background and the JB/T 15113-2025 standard
Yuanfeng dates its business to 2009. It develops, builds and sells tea-processing equipment in Anji, which explains a catalogue centred on white tea lines. Its own market-share and sales-ranking statements are left out here.
China's national standards platform names Anji Yuanfeng as a drafting unit for JB/T 15113-2025, the standard for fresh-leaf spreading and wilting machinery. It was published in May 2025 and took effect in November 2025. That record covers spreading and wilting machines. If you buy withering separately, the HONGMING 6CWF/6CDF Continuous Tea Withering Line is one comparable line to put the same standard question to. Yuanfeng also mentions a 2019 group standard, which is a different document; ask for a copy if it matters to you, and ask which modules of your line are built to which standard.
[1][4]Is this a fit for your project?
Based on the manufacturer's published range.
A good fit for
- A white tea processing line for a named tea product and a defined material route.
- A single shaping, classification, conditioning or drying machine with its own specification.
- Buyers who want local installation and spring-tea repair cover inside Anji.
Confirm in writing before ordering
- The numbered module list, transfer equipment, controls and the jobs that stay manual.
- Capacity and how it was measured, utility loads, layout, cleaning access and commissioning scope.
- Overseas commissioning, warranty length and which standards apply to each module, in writing.
Questions buyers should settle
Will every stage Yuanfeng describes be in my quotation?
Only the stages listed in your quote are included. Ask for a numbered list of machines and accessories for the line you are offered.
Does automatic feed mean the line runs without operators?
Automatic feed and discharge move leaf between stages. Receiving tea, changeovers and cleaning still need people, so ask Yuanfeng for the staffing plan it expects.
Does the spreading and wilting standard cover the whole line?
JB/T 15113-2025 concerns spreading and wilting machines. Ask Yuanfeng which standards apply to the shaping, conditioning and drying modules you order.
Is installation free outside Anji?
The free delivery and on-call repair promises are written for Anji and China. Agree overseas installation, travel costs and warranty in the contract.
Spring-tea service in Anji and export support
Yuanfeng offers free delivery within Anji and free installation and commissioning for equipment it sells. During the spring tea season it promises on-call repair inside Anji and attendance elsewhere in China based on travel time. Overseas commissioning, response times outside Anji and warranty length are not set out, so write them into your contract.
[5]| Yuanfeng's published service | Add to an export agreement |
|---|---|
| Delivery within Anji | Agree who handles export packing, freight, unloading and delivery to your site. |
| Installation and commissioning | List the work included, engineer travel, utilities and site readiness, trial leaf, training and the acceptance documents. |
| Spring-tea repair | Agree how urgent faults are escalated in season, which spare modules and wear parts you hold, remote diagnosis and who can attend at your location. |
Anji Yuanfeng Tea Machinery Co., Ltd.
A useful inquiry starts with a clear task
Prepare the same requirement for each supplier. Add the exact model, configuration and acceptance conditions before comparing quotations.
Your entries stay on this page, are not uploaded or sent to a supplier, and clear after a reload. Copy or print to retain them.
Before comparing the order
0 of 6 essentials checked
Sources
Each source is listed with the date it was checked. Ask the factory to confirm current stock, certificates and approvals for your market.
Yuanfeng company and white-tea line-development introduction
manufacturer · Record checked 2026-09-26
Company history from 2009 and the stages Yuanfeng links into its white tea line.
Yuanfeng tea production line page
manufacturer · Record checked 2026-09-26
Describes the line controls and automatic feed and discharge.
Yuanfeng tea-conditioning machine product entry
manufacturer · Record checked 2026-09-26
Product entry for the conditioning machine, written largely in the general line text.
National standards platform JB/T 15113-2025 fresh-leaf spreading/wilting machines
standard body · Record checked 2026-10-07
Standard record naming Anji Yuanfeng among the drafting units, with publication and effective dates.
Yuanfeng published service guarantees
manufacturer · Record checked 2026-10-11
Free delivery in Anji, free installation and commissioning, and spring-tea repair terms.
Ministry of Agriculture-hosted Anji Baicha classification and process account
government · Record checked 2026-10-11
A 2020 article explaining that Anji Baicha is a green tea and that its process includes fixation.
Some model details are incomplete in the manufacturer's publications. Confirm them with the factory before ordering.
Report an outdated detail or a source mismatch ↗