Wuyi Speedy Garden Machinery Co., Ltd.

武义斯必德园林机械有限公司

Wuyi Speedy Garden Machinery builds machines for three jobs on a farm, orchard or estate: cutting grass and vegetation, chipping pruned branches and grinding out stumps. Its range includes tracked remote mowers such as the SPY-550, the SPY-10 branch chipper and the SPY-SG15 walk-behind stump grinder. Pick the job first, then the model and its engine and control build, and ask for a quote on that exact configuration.

See models and specifications Build your inquiry

CropEquip Editorial · Sources checked 2026-10-12

Which Speedy machine for which job

Speedy sells separate machines for each stage of land upkeep. Each one is bought for its own task, so start from the vegetation, the branch pile or the stump in front of you. Other makers of these machines appear in our garden and forestry category.

[1][4][5][6][7]

Job	Speedy range and what to ask
Grass and vegetation	The catalogue splits mowers into riding and zero-turn, walk-behind and high-grass, and tracked remote models. Choose by access and the vegetation you cut, then ask Speedy for the slope limit and a typical cutting rate for that model.
Pruning residues	The chipper line carries several SPY codes. The SPY-10 table gives its blade set and a two-dimensional maximum cutting size; ask what branch material and output that size was set for.
Stumps	The SPY-SG15 grinder table lists its cutting wheel and how far it reaches below and above ground. Reach tells you depth and height, so ask separately how long a stump of your size takes.
Other lines	Blowers, pole saws and snowblowers sit in the same catalogue. Ask for each model's own data if you add them to a farm order.

Models and specifications

Quote the exact model, configuration and operating conditions together, and ask the factory to confirm current availability.

Speedy SPY-10 Branch Chipper

Catalogue reference: SPY-10

The Speedy SPY-10 is a manual-start branch chipper for orchard and farm pruning. Its table lists a Jiangdong 270 cc/11 hp engine, two moving blades and one fixed blade, a maximum cutting size of 5.25×3.75 inches and a gross mass of 77 kg. Two entries need Speedy's answer before you order. The product photograph shows a 457 CC engine label, and the packing size is printed as 33.5×22.7×23.2 mm. Send Speedy a description of your pruning material and the chip output you want, and ask for the engine and packing data for your build in writing.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

Speedy SPY-550 Tracked Remote Mower

Catalogue reference: SPY-550

The Speedy SPY-550 is a tracked remote-controlled mower with a 55 cm cutting width, a Loncin 224 cc/7.5 hp engine and twin-motor drive. It weighs 136 kg net and measures 900×930×560 mm. It is built for mowing orchard rows, banks and farm vegetation without an operator on board. Speedy's general copy for its remote machines mentions 2.4G radio control, a 300 m radius, six hours of endurance and infrared obstacle avoidance. Ask Speedy to confirm which of these apply to the SPY-550 you buy, together with its battery, slope limit and controller.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

Speedy SPY-SG15 Stump Grinder

Catalogue reference: SPY-SG15

The Speedy SPY-SG15 is a small wheeled stump grinder with six cutter heads on a 254×75 mm cutting wheel, driven by a Loncin 252 cc/15 hp engine. Speedy lists a cutting reach of 300 mm below ground and 500 mm above ground, a net mass of 92 kg and a 950×800×610 mm packing case. It suits orchard renewal and land upkeep where stumps need grinding out one by one. Before quoting, tell Speedy the stump sizes, how far down they must go and how the machine reaches them, and ask for the cutter and engine build you will receive.

Ask the factory for the current specification sheet for this model.

Read the full specification record ↗

SPY-550 tracked remote mower

The SPY-550 table lists a 55 cm cutting width, a Loncin engine and twin-motor drive. Speedy's company introduction adds radio control, obstacle avoidance, six-hour endurance and a 300 m operating radius for its remote machines in general. Ask Speedy which of those figures apply to the SPY-550 build you are quoted. A buyer comparing remote mowers might also look at the DAYEE DY330-764SB-00 remote crawler mower.

[2][6]

Topic	What Speedy gives and what to request
Power	The engine is listed as 224 cc/7.5 hp, with twin-motor drive as a separate entry. Request battery voltage and capacity, the charging set-up and motor ratings.
Slopes and signal	Ask for the maximum working slope, braking and holding performance on a bank, and how trees or buildings affect the radio link.
Stopping	Request the matching controller and its documented stop and signal-loss behaviour, plus what the infrared obstacle system detects.
Work rate	Ask for a demonstration on your own terrain and grass at your cut setting. The cut width alone gives no hectares per hour.

SG15 stump reach and SPY-10 branch size

The stump grinder and the chipper are sized in different ways. Read each figure for its own machine and job.

[2][5][7]

Published figure	How to use it
SG15: 300 mm below ground, 500 mm above ground	These are cutting depth and height. Ask how wide the wheel sweeps and how large a stump diameter Speedy recommends.
SG15: six cutter heads, 254×75 mm wheel	Request cutter material, wheel speed, the replacement procedure and spare-part references.
SPY10: 5.25×3.75 inches maximum cutting size	Ask whether this is the feed opening or a tested branch size, and what round-branch diameter Speedy approves.
Chip size	Speedy's company copy says its chippers take material below 10 cm and discharge it below 2 cm. Ask for SPY10 results on your pruning material, including throughput.

Is this a fit for your project?

Based on the manufacturer's published range.

A good fit for

Enquiries for orchard and farm vegetation mowing, branch chipping and stump grinding from one supplier.
Comparing mower, stump grinder and chipper builds from Speedy's current model tables.

Confirm in writing before ordering

Which company signs the contract and which site builds and inspects your machines.
Controller, battery and engine for the build you buy, with its slope and feeding limits and current manual.
The correct SPY10 engine and packing units, plus spare parts and destination documents.

Engine, packing and parts to fix on the quote

A few catalogue entries disagree with each other. The SPY-10 photograph shows a 457 CC engine label, while the table says 270 cc/11 hp. SPY-10 packing is printed as 33.5×22.7×23.2mm. The SPY-26FB catalogue label differs from the SPY-26FB2 name in its description. Settle each of these with Speedy before the order goes ahead.

[4][5][6][7][8]

Machine identity
Get the offered model and current engine and control build in writing, with a photo of that exact machine.
Packing data
Request packed dimensions with units, gross and net mass, and lifting or unloading instructions. The tracked mower's packing row also lacks a unit.
Container code
SG15 is listed as 40PH and other models as 40HP. Ask for the container type and packing plan for your quantity.
Spare parts
List the SG15 cutters, SPY10 moving and fixed blades and the mower's drive and control parts, with lead times and stock.

Company name, addresses and history

The official Chinese site names Wuyi Sibide Garden Machinery. The CNVerify bilingual record shows the same Chinese company with Speedy as its English name, a legal date of 19 April 2021 and a registered address at Baiyang plots 2/3, inside another named company's premises.

The contact page gives No.39 Mudan Road in Wuyi's economic-development industrial area. Ask Speedy which site builds your machines and where you can visit, collect samples or inspect.

The About page speaks of ten years in the industry. That describes experience; the legal company dates from 2021.

[1][2][3][9]

Factory size, testing and markets

Speedy's About page describes an 8000-square-metre factory, a CNAS-certified testing centre, ISO9001, 72-hour extreme-condition tests, a failure rate below 0.5%, twelve patents and R&D spending of 15% of revenue. It also names farms, municipal work, golf courses and overseas markets.

If these matter for your decision, ask for the ISO9001 certificate with scope, the CNAS accreditation record, the test method behind the 72-hour figure and named reference customers in your region.

[2]

Run a demo that matches your farm work

Test one job at a time on the machine build you plan to buy. Write down the set-up and result so later orders and repairs refer to the same machine.

[2][5][6][7]

Remote mowing
Note cut setting, vegetation, ground, controller and drive version, and any stops. Agree in advance what counts as a finished area.
Stump grinding
Note stump condition, how far it must go, access and the cutter set fitted. Record time taken and what material is left.
Chipping
Agree the pruning material and feeding method with Speedy. Record what fed well, any blockages and the output.
Ongoing service
Keep model and engine details, parts lists and manuals with your maintenance log, and agree support response and spare parts in writing.

Wuyi Speedy Garden Machinery Co., Ltd.

A useful inquiry starts with a clear task

Prepare the same requirement for each supplier. Add the exact model, configuration and acceptance conditions before comparing quotations.

JobMachine buildDemo termsParts and supportShipping and inspection

Prepare a platform inquiry

Your entries stay on this page, are not uploaded or sent to a supplier, and clear after a reload. Copy or print to retain them.

Before comparing the order

0 of 6 essentials checked

Keep the exact model and quoted configuration together. Describe the actual crop, material, field or installation conditions. List included parts, accessories and any separately priced items. Agree a complete quote, destination, packing and delivery scope. Request manuals, spare-part identifiers and an acceptance method. Resolve conflicting specifications and any missing documents.

Questions buyers should settle

When was Speedy founded?

The legal company dates from 19 April 2021 in the CNVerify record. The About page's ten years refers to industry experience.

[2][9]

Does the SPY-550 reach 300 m and run for six hours?

Those figures come from Speedy's general introduction to its remote machines. The SPY-550 table leaves them out, so ask for range and runtime figures for your build.

[2][6]

Is the SPY-10 engine 270 cc or 457 CC?

The table says 270 cc and the product photograph shows a 457 CC label. Ask Speedy to state the engine for your order in writing.

[7][8]

Are the contact and registered addresses the same factory?

They are different addresses, and the sources give no link between them. Ask Speedy which site makes your machines.

[3][9]

Sources

Each source is listed with the date it was checked. Ask the factory to confirm current stock, certificates and approvals for your market.

[1]