CompareBuyer accountFor factories ↗Request a quote

Planting

Xinglaihe 820 / 2ZG-8AJ Seed-Production Rice Transplanter

The Xinglaihe 820 / 2ZG-8AJ is an eight-row diesel rice transplanter sold for seed-production work. It plants rows 20 cm apart, narrower than the 30 cm six-row 630 machines, with six along-row spacings from 11 to 25 cm. It takes blanket-mat seedlings and runs on an 18 kW XY377-A engine with HST and four-wheel drive. For seed production, settle your parent row pattern, how seedling lots stay separate and how planting will be measured before you order.

Zhejiang Xinglaihe Agricultural Equipment Co., Ltd. ↗

Build my procurement brief

Plan the parent rows first

For seed production, start from your parent varieties, the planting pattern and how you keep lots apart. Eight rows is the machine's capacity; you decide which rows carry the female and male parents. For commercial paddy planting outside seed production, ask about the 825 eight-row transplanter from the same maker; other rice planting machines are grouped in our planting section.

  1. Draw the row pattern

    Show which parent lot goes in each row and how the pattern carries on between passes. Get Xinglaihe's written agreement that the machine plants it without stray rows.

  2. Link seedling supply to row units

    Check tray and mat fit and the operator's loading order. Keep parent lots marked through transport, loading and changeovers.

  3. Ask how rows are switched

    The 8AJ table does not list automatic parent-row selection. Ask how rows are stopped or selected on the machine you will receive.

  4. Check pass changes and edges

    Agree a demonstration of your loading and pattern procedure and inspect the planted rows. Seed purity also depends on your own lot handling.

Sources [1]

Row pitch, working width and vehicle width

Each figure answers a different question. The swath figures below are simple arithmetic from the row count and pitch.

Dimension or calculationHow to use it
20 cm between eight planting rowsThe planting geometry. Check that your field pattern uses this pitch.
Eight ×0.20 m =1.60 m nominal swathWidth of one repeating pass. Agree the exact pass-to-pass pattern and guidance with Xinglaihe.
Seven ×0.20 m =1.40 m between outer row centresDistance from first to last row centre.
2070 mm vehicle widthFor transport and field access.
630 / 2ZG-6Q or 6A: six rows at 30 cmA different layout from the 8AJ, despite the shared 2ZG name.

Sources [1] [2]

Published specifications

Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.

SpecificationPublished valueMeaning / limit
Model / catalogue identity820 / 2ZG-8AJ; diesel [1]Xinglaihe's seed-production model.
Rows / pitchEight rows / 20 cm [1]Distance between planting rows. Vehicle width is listed separately.
Along-row spacing11, 13, 15, 18, 21, 25 cm [1]Six settings. Measure the spacing you actually get in the field.
Published planting count140, 120, 105, 88, 80, 62 per 3.3 m² [1]As printed, one count per spacing. Ask Xinglaihe whether it counts plants or hills and on what area.
Planting depth1–5 cm; six levels [1]The mechanical range. Choose depth for your crop.
Seedling envelopeBlanket mats; 2–4 leaves; 8–25 cm height [1]Tray size, mat strength and variety suitability are not listed; send samples.
Horizontal / longitudinal feed11.5 mm (16 times) / 15.4 mm (12 times); longitudinal 8–19 mm [1]Seedling feed settings. They set how much mat is picked each time.
EngineXY377-A; 1132 cc; 18 kW at 3000 rpm [1]Three-cylinder inline, water-cooled, four-stroke diesel. The kW figure is engine output.
Travel / steeringFour-wheel drive; HST + two mechanical gears; hydraulic assist [1]Planting speed, road speed and guidance options are not in the table.
Envelope / mass3500 ×2070 ×2300 mm; 870 kg [1]Catalogue size and mass. Ask for transport size and loaded mass for your build.
Fuel / starting0# diesel / starter motor [1]Chinese diesel grade. Check the grade and cold-weather needs for your country in the engine manual.
Capacity interval0.4–0.6 ha/h (6–9 mu/h) [1]Catalogue range without test conditions or allowance for turns and refills.

Bring real mats to the demonstration

Xinglaihe specifies blanket-mat seedlings at 2–4 leaves and 8–25 cm tall. Tray size range, mat thickness and strength, and a list of tested parent varieties are not given. Bring representative mats from each lot and ask for the model's nursery and feeding requirements.

The horizontal feed choices and the 8–19 mm longitudinal feed set how much mat is picked. Agree how empty positions, multiple seedlings, damaged seedlings and row-to-row consistency will be checked in the demonstration, with pass values set for your crop and task.

Sources [1]

What the density figures mean

The catalogue pairs the six spacings with counts of 140, 120, 105, 88, 80 and 62 per 3.3 m², without saying how they were counted.

By arithmetic, a perfect 0.20 m × 0.11 m grid gives 150 planting positions per 3.3 m², which differs from the printed 140. Ask Xinglaihe to explain its basis, then measure your own arrangement. Seedlings, planting positions and parent proportions are three different numbers.

Sources [1]

Seedling supply, changeovers and daily output

Xinglaihe lists 0.4–0.6 ha/h without field conditions, refill frequency, travel speed or shift output. Parent-lot changeovers, seedling handling, turns and field access all affect your day. Ask for a demonstration with your planned row pattern. On small or awkward parent plots, it can be worth pricing the four-row 2ZG-4QR alongside it.

Four-wheel drive, HST and hydraulic steering are listed. Ask for the soil and water limits, field entry and exit requirements and operator training for this model. Work out planting speed from an agreed working width and field efficiency, rather than from engine rpm.

Sources [1]

Buyer questions

Does the seed-production model set parent ratios automatically?

The model table does not describe automatic parent-row control. Agree your row pattern, lot handling and the row-switching method with Xinglaihe. [1]

Is 2070 mm the planted width?

It is the vehicle width. Eight rows at 20 cm give a repeating swath of 1.60 m, depending on how passes join. [1]

Are the density figures seedlings per position?

The table gives counts per area without saying what was counted. Ask Xinglaihe for the basis and measure count, placement and parent split in your demonstration. [1]

Does the 2FCF-8 fertilizer unit fit the 8AJ?

The 2FCF-8 page names the 2ZG-8 family only. Ask Xinglaihe to confirm in writing the fit, mount and outlet spacing for 20 cm rows. [1] [3]

Adding a fertilizer attachment

The 2FCF-8 fertilizer page names the 2ZG-8 carrier family in general. It does not mention the 2ZG-8AJ or give an adjustment drawing for 20 cm rows. Before adding it to an offer, get written fit approval from Xinglaihe, with mounting and drive details and outlet alignment for this machine.

Fertilizer depth and side offset are set on the fertilizer unit; the 8AJ's 1–5 cm setting is seedling depth. In a combined demonstration, check planting, fertilizer discharge and final placement one by one.

Sources [1] [3]

Delivery, acceptance and service

Xinglaihe's photo shows a machine labelled 2ZG-8AJ. List the build and options you want on the order.

  1. Identity and options

    Exact 2ZG-8AJ build, engine, and any row-control or navigation options. The table lists no navigation system.

  2. Transport and loads

    Transport arrangement for the 3500 ×2070 ×2300 mm machine and loaded mass with seedlings and any attachment.

  3. Field acceptance

    Your parent pattern, mat feeding, measured row and plant spacing, depth and planting quality under agreed conditions.

  4. Manual and seasonal parts

    Operating and maintenance instructions for this model, nursery guidance and part numbers. Xinglaihe's public repair pages cover transplanters in general; ask for the 8AJ manual.

Sources [1] [4] [5]

Prepare a model-specific brief

Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.

Sources

Specifications come from the manufacturer's publications listed below, with the date each was checked.

  1. Official 820 / 2ZG-8AJ specification

    manufacturer · Checked 2026-10-11

    Model table with 20 cm row pitch, spacing and density series, seedling conditions, feed, engine, drive, size and capacity.

  2. Official six-row 630 comparison

    manufacturer · Checked 2026-10-11

    The six-row 630 machines plant at 30 cm.

  3. Official paired 2FCF carrier table

    manufacturer · Checked 2026-10-11

    Fertilizer attachment table naming the 2ZG-8 carrier family.

  4. Official maintenance index

    manufacturer · Checked 2026-10-11

    General transplanter repair topics.

  5. Official labelled 2ZG-8AJ model photograph

    manufacturer · Checked 2026-10-11

    Photo of the machine with its 2ZG-8AJ label.

Report a correction through our contact form, quoting 2ZG-8AJ and the relevant specification.

Share this pageLinkedInXFacebookWhatsAppTelegramRedditEmail