Irrigation
Leapaq WP30X 3 inch Clean-water Pump
The Leapaq WP30X is a three-inch petrol water pump for clean water. It runs on Leapaq's LP200 engine, a 196 ml single-cylinder four-stroke rated at 6.5 HP at 3600 r/min. Leapaq lists maximum flow of 1000 L/min, pump lift of 28 m and suction head of 8 m, and packs it at 26 kg net. These are separate maximums with no flow and head curve, so ask Leapaq for the curve and a dated model sheet for the revision you buy. This page sets out the table, how to size a duty and what to check in the delivered set.
Shaoxing Leapaq Power Machinery Co., Ltd. ↗
Build my procurement briefSizing a working point: flow against head
Leapaq lists maximum flow and pump lift as separate entries, with no curve or test setup. The table does not give the flow you get at 28 m. The 8 m suction figure also depends on site elevation, water temperature and the hose arrangement.
Send Leapaq the flow you need, the height difference, the suction setup, hose lengths and diameters, fittings and how the water is discharged. Ask for a curve for the engine and impeller revision on offer, marked with your operating point, pipe losses and suction limits. Our guide to choosing a petrol engine water pump walks through total head, suction lift and reading a curve, so you can check that operating point yourself.
Sources [1]
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Application and port | Clean water; 3 inch [1] | Ask Leapaq separately before pumping water with solids or chemicals, or for drinking water use. |
| Lift and suction | Pump lift 28 m; suction head 8 m [1] | Two separate table figures. Your site's suction height and hose layout set what you actually get. |
| Maximum flow | 1000 L/min (60 m³/h) [1] | The top flow figure. Ask for the curve to see the flow at your head. |
| Engine | LP200; 196 ml; 68 × 54 mm bore/stroke [1] | Single-cylinder, four-stroke, OHV, air-cooled. |
| Engine maximum output | 6.5 HP at 3600 r/min [1] | Engine maximum. Ask for the continuous rating and the pump's hydraulic power. |
| Fuel and oil capacities | 3.6 L / 0.6 L [1] | Tank sizes. Runtime and service intervals need the fuel use at your operating point. |
| Packing | 515 × 385 × 450 mm; net 26 kg, gross 28 kg [1] | Listed under Package. Ask for the machine's own dimensions and weight ready to run. |
WP30X and WP20X side by side
Leapaq's table has a column for each pump. Read the WP30X figures from its own column.
| Item | WP30X and WP20X |
|---|---|
| Port and engine | WP30X: 3 inch, LP200. WP20X: 2 inch, LP160. |
| Displacement | WP30X: 196 ml. WP20X: 163 ml. |
| Maximum flow and lift | WP30X: 1000 L/min and 28 m. WP20X: 600 L/min and 26 m. Each listed as a separate maximum. |
| Net weight | WP30X: 26 kg. WP20X: 24 kg. Both listed under packing. |
Sources [1]
Water type and what comes in the box
The table names Clean Water as the application. It gives no particle size limit, seal or impeller material, chemical resistance or drinking-water approval. Describe your water source and job, and ask Leapaq for the limits that apply. For muddy or debris-laden water, ask about a trash pump instead. One such pump from another maker is the Yaofeng YFTP30 Dirty-Water Pump.
The table also leaves out the port thread or flange standard, suction and discharge hoses, strainer, priming method and fittings. Ask for a connection drawing and a written list of contents. When you pick suction and lay-flat hose for the job, our hose and pipe specification guide covers vacuum rating, inner diameter and friction loss. Tank size alone will not tell you how long a fill lasts; ask for fuel use at your operating point.
Sources [1]
Current supplier details and service
Leapaq's contact and company pages give an address at Cenqian Village. A government notice records that the company moved out of that site, so ask for the current production and service address.
Before you buy, get a dated quotation and model sheet, the current company and service contact, the instructions, and part numbers for the engine and the pump body. The service contact page states no warranty period or response time, so put both in the contract.
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Accepting the pump
Test the pump on your own water source and discharge, following Leapaq's instructions. Other irrigation pumps are listed in our irrigation section.
Fix the build
WP30X revision, LP200 engine, and the impeller, seal and connection configuration.
Choose the duty
Your flow and head marked on Leapaq's curve, with suction and pipe conditions.
Check the set
Hoses, strainer, fittings, priming parts, packed dimensions and weight.
Record handover
Measured performance, engine and pump spare parts, instructions and written service terms.
Sources [1]
Buyer questions
Can the WP30X deliver 60 m³/h at 28 m head?
Leapaq lists those as two separate maximums. Ask for the WP30X curve and its test conditions to see the flow at your head. [1]
How current is the WP30X data?
The table comes from Leapaq's official pages dated 7 October. Ask for a dated model sheet for the revision you are quoted. [1]
Can the WP30X pump dirty water?
It is listed for clean water, with no solids limit given. Ask Leapaq for the allowed particle size before using it on dirty water. [1]
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Leapaq official WP20X/WP30X table, archived 7 October
manufacturer · Checked 2026-10-11
Side-by-side table for the two pumps: ports, engines, flow, lift, suction, capacities and packing.
- Leapaq official introduction, archived 7 October
manufacturer · Checked 2026-10-11
Product families, assembly and test equipment, and the Cenqian site.
- Leapaq official contact, archived 7 October
manufacturer · Checked 2026-10-11
The Cenqian address and a service contact route.
Report a correction through our contact form, quoting WP30X and the relevant specification.