CompareBuyer accountFor factories ↗Request a quote

Shaoxing Leapaq Power Machinery Co., Ltd.

绍兴利派动力机械有限公司

Shaoxing Leapaq Power Machinery makes general-purpose petrol engines, generators, water pumps and range extenders, and describes automatic assembly lines and test equipment. Its WP30X three-inch clean-water pump runs on the LP200 engine. The company pages give a site at Cenqian Village, but a 2022 Zhejiang government notice says the company moved out of that address, so ask for the current factory location before you plan an audit or order.

Jump to the information you need

Confirm where Leapaq builds today

Leapaq's company pages, dated 7 October, give a 5300-square-metre building at Cenqian Village, Shaoxing. A Zhejiang environmental-inspection disclosure, entry 131 on page 36, says the company moved out in June 2022 when its lease ended, and names later tenants at that address.

The notice does not say where Leapaq went, and the later tenants are separate businesses. Before an audit or a shipment, ask Leapaq for its current company registration, the production address and photos or a visit of the line that will build your order.

[2][3][4]

Engines, generators, pumps and range extenders

Leapaq sells bare engines and complete machines driven by them. An engine's maximum output tells you little about generator electrical output, pump duty or how a range extender fits a vehicle, so ask for the figures of the complete machine.

[1][2]
Product familyWhat to ask for
General enginesSpeed and output rating, shaft and control configuration.
GeneratorsRated electrical output, voltage and frequency, and how it takes load.
Water pumpsFlow and head curve, water limits, suction and the connection package.
Range extendersThe host vehicle or interface, controls and integration requirements.

Models and specifications

Quote the exact model, configuration and operating conditions together, and ask the factory to confirm current availability.

Leapaq WP30X 3 inch Clean-water Pump

Catalogue reference: WP30X

The Leapaq WP30X is a three-inch petrol water pump for clean water. It runs on Leapaq's LP200 engine, a 196 ml single-cylinder four-stroke rated at 6.5 HP at 3600 r/min. Leapaq lists maximum flow of 1000 L/min, pump lift of 28 m and suction head of 8 m, and packs it at 26 kg net. These are separate maximums with no flow and head curve, so ask Leapaq for the curve and a dated model sheet for the revision you buy. This page sets out the table, how to size a duty and what to check in the delivered set.

Rated power
6.5000–6.5000 hp
Machine mass
26.0000 kg
Connection size
3.0000 in
Engine displacement
196.0000 cc
Engine configuration
LP200, single cylinder, four-stroke OHV, air cooled
Read the full specification record ↗

Is this a fit for your project?

Based on the manufacturer's published range.

A good fit for

  • WP30X pump orders based on Leapaq's published table.
  • Separate quotes for engines, generators and pumps from Leapaq's range.

Confirm in writing before ordering

  • The current factory address and model revision, given the 2022 move-out notice for Cenqian.
  • Assembly and test capacity for your model, performance curves and who provides service.

WP30X clean-water pump at a glance

Leapaq's table lists WP20X and WP30X side by side. The WP30X has a three-inch port and an LP200 196 ml engine rated at 6.5 HP at 3600 r/min. It lists maximum flow of 1000 L/min, pump lift of 28 m and suction head of 8 m. Leapaq gives these as separate maximums and publishes no curve.

To get a useful offer, state the flow and head you need with your suction and pipe layout. Ask for a controlled sheet with materials, allowed solids, connections and what comes in the box. Comparable petrol pumps to quote against it include the ERAYAK EYP Petrol Water Pumps and the JOYWAY JW-WP520 Petrol Water Pump. For working out that duty point from your head and suction, use our petrol water pump guide on pump curves.

[1][3]

Assembly lines and production capacity

Leapaq describes test equipment, automatic assembly lines and a production capacity of 300000 sets a year. It also says it exports to more than seventy countries. No date, equipment list or split between engines and pumps is given.

For a pump order, ask who makes the engine and the pump body, and who assembles the complete set. Request the hydraulic and engine checks, traceability and acceptance tolerances for the revision you buy, and ask which service partners cover your country. Container loading figures in the table tell you about packing, so ask for capacity figures separately.

[1][2]

Steps to a Leapaq order

Start with the current company and site, then fix the machine and how it will be accepted. Leapaq's pump sits with other makers in our irrigation category.

[1][2][3][4]
  1. Confirm company and site

    Current registered entity, production address and which components Leapaq makes.

  2. Define the duty

    Pump, generator or other build and the output you need from it.

  3. Approve the build

    Revision, performance records, assembly and test plan, and a sample.

  4. Agree service and handover

    Engine and pump parts, instructions, written warranty and delivery date.

Shaoxing Leapaq Power Machinery Co., Ltd.

A useful inquiry starts with a clear task

Prepare the same requirement for each supplier. Add the exact model, configuration and acceptance conditions before comparing quotations.

Prepare a platform inquiry

Your entries stay on this page, are not uploaded or sent to a supplier, and clear after a reload. Copy or print to retain them.

Before comparing the order

0 of 6 essentials checked

Questions buyers should settle

What does the Zhejiang notice say about Leapaq?

It records that the company moved out of its Cenqian site in June 2022 after the lease ended, and then discusses later tenants. It reports no current finding against Leapaq.

[4]
Can Leapaq really build 300000 sets a year?

That is Leapaq's own undated figure, with no product split. Ask for current output for your model and a recent audit report.

[2]
Which engine drives the WP30X pump?

The LP200, a 196 ml engine rated at 6.5 HP at 3600 r/min.

[1]

Sources

Each source is listed with the date it was checked. Ask the factory to confirm current stock, certificates and approvals for your market.

[1]

Leapaq official WP20X/WP30X table, archived 7 October

manufacturer · Record checked 2026-10-11

Side-by-side table for the two pumps: ports, engines, flow, lift, suction, capacities and packing.

[2]

Leapaq official introduction, archived 7 October

manufacturer · Record checked 2026-10-11

Product families, assembly and test equipment, stated capacity, export reach and the Cenqian site.

[3]

Leapaq official contact, archived 7 October

manufacturer · Record checked 2026-10-11

The Cenqian address and a service contact route.

[4]

Zhejiang environmental-inspection disclosure

government · Record checked 2026-10-11

Page 36, entry 131: the company moved out of its Cenqian site in June 2022 when the lease expired.

Some model details are incomplete in the manufacturer's publications. Confirm them with the factory before ordering.

Report an outdated detail or a source mismatch ↗

Related buying guides

Crop sprayers and diaphragm spray pumps: what to specify

Livestock House Fans and Orchard Frost Fans: How to Size and Compare Them

Choosing a Petrol Engine Water Pump for Irrigation and Transfer

Keep your sourcing work together

Represent this factory? ↗
Page menu ↑
Share this pageLinkedInXFacebookWhatsAppTelegramRedditEmail