Parts & attachments
Pacific ZPM1X8 Agricultural Wear Part
ZPM1X8 is a wear part in Pacific's Agriculture parts catalogue. The catalogue image shows a broad, pointed working face with two mounting holes. Pacific publishes no drawing, material grade, hardness, matching host machine or test figures for it. Use the code and image to name the part when you contact Pacific, then ask for a dimensioned drawing and a material sheet, and approve a sample for fit and wear before you place repeat orders.
Zhejiang Huashachi Machinery Co., Ltd. ↗
Build my procurement briefFrom catalogue image to an approved drawing
The catalogue link opens a photo, not a data sheet. The two holes help Pacific recognise the part you mean; the dimensions you order to come from the drawing. How to move a catalogue photo to an approved drawing and sample is set out in our guide to sourcing machine components to drawing.
| Feature | What to settle with Pacific |
|---|---|
| Working profile | Width, length, thickness, edge shape and tolerances. |
| Mounting | Hole centres, hole or countersink form and fasteners for your machine. |
| Direction and position | Working direction, left or right hand and position on the machine; the catalogue gives no hand. |
| Host machine | Machine and assembly model and revision, the part you replace now, and an approved drawing or corrected sample. |
Sources [1]
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Catalogue code | ZPM1X8 [1] | Label in the Agriculture category, linked to a product image. Order against a drawing tied to this code. |
| Shape in the image | Broad pointed face and two mounting holes [1] | Seen in the catalogue photo. Hole size and spacing, thickness, hand and tolerances come from the drawing. |
| Material and fitting | Not listed for this part [1] | Ask for alloy, heat treatment, hardness, hole and countersink pattern and the host machines it fits. |
Ask for this part's material and process
Pacific's company introduction lists blanking, forging, machining, heat treatment, welding, shot blasting and polishing, and surface treatment. It also names carbide production and welding equipment. The ZPM1X8 entry assigns none of these to this part.
Ask for a material and process sheet for ZPM1X8. Carbide tips, boron steel, forging or a hardness value belong in your order only once Pacific writes them against this part. Material certificates and inspection reports should name the agreed drawing, revision and batch.
Comparing it with the part you use now
The catalogue lists no price, weight, wear-life figure or test conditions. Start with a drawing or sample match, and judge fit and wear as two separate checks. For a second quote, the Hedi boron-steel plough wear parts can go through the same drawing and sample checks.
Confirm the code
Ask Pacific to tie ZPM1X8 to a current drawing and to the build it quotes.
Approve mounting
Your fitter checks the part against the approved dimensions and fitting procedure.
Agree material checks
Alloy, heat treatment, finish and the batch inspection records you need.
Judge wear in your fields
Record the machine setup, soil and working conditions and wear observed; base life comparisons on that record.
Keep repeat orders consistent
For repeat replacement orders, a catalogue code needs a versioned drawing behind it. Get the drawing, the marking method and written approval for any change in material or shape. Agree quantities, tooling charges, packing, spare fasteners and shipping terms on the quotation.
Other codes in the Agriculture category show different parts. Each has its own drawing and material, so request the figures for ZPM1X8 itself.
Sources [1]
Buyer questions
Can I measure the mounting holes from the photo?
The photo has no scale or tolerances. Ask Pacific for the dimensioned drawing. [1]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Pacific official Agriculture parts category and ZPM1X8 image
manufacturer · Checked 2026-10-11
Agriculture part codes and the ZPM1X8 photo showing its shape and two mounting holes.
- Pacific official company/process introduction
manufacturer · Checked 2026-10-11
Forming, heat-treatment, welding, carbide and finishing processes used across the company.
Report a correction through our contact form, quoting ZPM1X8 and the relevant specification.