Parts & attachments
Yingke YK-67 Rototiller Assembly
The Yingke YK-67 is a rototiller assembly listed under the maker's Rototiller Parts. It carries a 1E44F-5 engine of 52 cc, rated at 2.2 kW at 7500 rpm, weighs 15.2 kg net and has a 32:1 ratio. Yingke publishes no tilling width, depth or package list for it. Below: what to ask about the package contents, how to read the ratio, how to match it to your machine, and how to approve a sample.
Zhejiang Yingke Industry and Trade Co., Ltd. ↗
Build my procurement briefWhat the YK-67 package includes
Yingke lists an engine and a ratio under a parts heading, without handles, guards or tines. Ask for a bill of the parts you will receive.
| Part of the build | What to ask Yingke |
|---|---|
| Engine side | Whether the engine is supplied, and its mount, coupling or clutch and controls. |
| Transmission and output | Which stage the 32:1 ratio belongs to; shaft and fastener geometry, rotation and duty limits. |
| Tilling parts | Tine set, mounting, guarding and the operating and installation instructions, if included. |
| Complete machine | If Yingke quotes a complete tiller, ask for its full identity, configuration and documents. |
Sources [1]
Published specifications
Read each value with its stated conditions, and ask the manufacturer for any limit not listed here.
| Specification | Published value | Meaning / limit |
|---|---|---|
| Catalogue entry | YK-67; Rototiller Parts [1] | Ask Yingke for the full list of parts in the package. |
| Engine | 1E44F-5; 52 cc [1] | Engine code and displacement. Ask for the engine maker, revision and documents for your market. |
| Rated power | 2.2 kW / 7500 rpm [1] | Engine rating at engine speed. Ask for output power and speed at the tines. |
| Net weight | 15.2 kg [1] | Ask what parts and fluids are included and the shipping weight. |
| Speed ratio | 32:1 [1] | Ask which input and output shafts it applies to, plus rotation direction and allowed duty. |
Reading the ratio and tine speed
The 7500 rpm goes with the rated-power figure. The 32:1 ratio is listed by itself, with no shafts named. Get the output speed at the tines from Yingke instead of dividing one by the other.
Ask for a transmission drawing and the input and output operating data: speed, direction, torque and duty, and the allowed connections. Yingke publishes no tilling speed, depth, width or work rate for the YK-67, so ask for them or measure them on a trial. To set those targets for the finished machine, our page on choosing a mini tiller or rotary cultivator explains working width, depth and rotation direction.
Sources [1]
Fitting it to your machine
Yingke's catalogue also lists clutch cases, gearboxes, operator-pipe systems and multifunction attachments. Fit between those parts, or with your own machine, depends on the drawings.
Send Yingke the host machine or assembly reference, mounting and coupling dimensions, controls and intended duty. Ask for a written fit statement against an approved drawing or a marked sample. Our guide to sourcing farm machine components to drawing explains how to set up that approval with a Chinese parts factory. Also request the mounting pattern, overall dimensions, fuel and starting setup and the lubrication and service schedule, which the entry leaves out.
Approving the unit and the finished tiller
A fit check and a test of the finished tiller are two separate steps. The company assembling the machine runs the second one, within Yingke's stated conditions and instructions.
Agree the build
Exact YK-67 revision, engine included or not, transmission and working and control parts.
Check the drawings
Mating interfaces, direction, allowed loads and operating data.
Test the duty
Set the soil and setup, and record performance on the finished machine. Measure depth and work rate yourself.
Close the paperwork
Markings, manuals, parts and maintenance, destination documents, packing and warranty terms.
Buyer questions
Is the YK-67 a complete tiller?
Yingke lists it under Rototiller Parts and does not give a parts list. Ask whether you get a complete machine or an assembly. [1]
What tine speed does the 32:1 ratio give?
Yingke does not say which shafts the ratio covers. Ask for the output speed at the tines in writing. [1]
Prepare a model-specific brief
Write your actual conditions below. This local worksheet is not sent, uploaded or saved after reload. Copy or print it before leaving.
Sources
Specifications come from the manufacturer's publications listed below, with the date each was checked.
- Yingke official YK-67 rototiller-parts entry
manufacturer · Checked 2026-10-11
YK-67 engine reference, displacement, rated power and speed, net weight and ratio.
- Yingke official company/parts introduction
manufacturer · Checked 2026-10-11
Yingke's parts business and catalogue groups, including clutches, gearboxes and attachments.
Report a correction through our contact form, quoting YK-67 and the relevant specification.